Citation: | Ge Zhengzheng, Li Xiaoyang, Jiang Tongminet al. Planning of CSADT with stress optimization under cost constrained[J]. Journal of Beijing University of Aeronautics and Astronautics, 2011, 37(10): 1277-1281. doi: CNKI:11-2625/V.20111020.1127.012(in Chinese) |
[1] Boulanger M,Escobar L A.Experimental design for a class of accelerated degradation tests[J].Technometrics,1994,36(3),260-272 [2] Yu H F,Tseng S T.Determining an appropriate termination time for an accelerated degradation experiment[J].Statistica Sinica,1998,8,207-220 [3] Li Qishan.Accelerated degradation test planning and optimization.The University of Arizona,the Aerospace and Mechanical Engineering Department,2002 [4] Yang G,Yang K.Accelerated degradation tests with tightened critical values[J].IEEE Transactions on Reliability,2002,51(4):463-468 [5] Yu H F,Chiao C H.Designing an accelerated degradation experiment by optimizing the interval estimation of the mean-time-to-failure[J].Journal of the Chinese Institute of Industrial Engineers,2002,19(5):23-33 [6] Yu H F.Designing an accelerated degradation experiment by optimizing the estimation of the percentile[J].Quality and Reliability Engineering International,2003,19(3):197-214 [7] Yu H F.Designing an accelerated degradation experiment with a reciprocal Weibull degradation rate[J].Journal of Statistical Planning and Inference,2006,136(1):282-297 [8] Polavarapu I,Okogbaa G.An interval estimate of mean-time-to-failure for a product with reciprocal weibull degradation failure rate //Alexandria V A.Proceedings Annual Reliability and Maintainability Symposium.United States:IEEE,2005:261-264 [9] Wang Yashun,Zhang Chunhua,Chen Xun,et al.Simulation-based optimal design for accelerated degradation tests //Kang Rui.The Proceedings of 8th International Conference on Reliability,Maintainability and Safety.Chengdu,China:IEEE,2009:1302-1306 [10] Wang Yashun,Zhang Chunhua,Chen Xun,et al.Simulation-based optimal design for accelerated degradation tests with mixed-effects model[J].Journal of Mechanical Enginerring.2009,45(12):108-114 [11] Meeker W Q,Hamada M.Statistical tools for the rapid development & evaluation of high-reliability products[J].IEEE Transactions on Reliability,1995,44(2):187-198 [12] Chhikara R S,Folks J L.The inverse gaussian distribution[M].New York:Marcel Dekker,1989 [13] Li Xiaoyang,Jiang Tongmin.Optimal design for step-stress accelerated degradation testing with competing failure modes //Richard Jones.Proceedings Annual Reliability and Maintainability Symposium.Fort Worth,Texas,USA:IEEE,2009:64-68
|