Citation: | Zhu Yu, Meng Biao, Zhang Hua, et al. Research on modular combined modeling for parallel mechanism[J]. Journal of Beijing University of Aeronautics and Astronautics, 2003, 29(9): 774-778. (in Chinese) |
[1] 汪劲松,朱 煜,张 华.并联机床虚拟产品设计系统及基本框架研究[J].计算机集成制造系统,2001,7(5):57~62 Wang Jinsong, Zhu Yu, Zhanghua. The virtual product design system for parallel machine tools and its framework [J]. CIMS, 2001,7(5):57~62(in Chinese) [2] 韩海生,黄 田,周立华,等.虚拟环境下并联机构建模与仿真[J]. 制造技术与机床,2000, 20(1):19~20 Han Haisheng, Huang Tian, Zhou Lihua, et al. Modeling and simulating of parallel mechanisms in virtual environment[J]. Manufacturing Technology and Machine Tools, 2000, 20(1):19~20(in Chinese) [3] Hunt K H. Kinematic geometry of mechanisms [M]. London:Oxford University Press, 1978 [4] Hunt K H. Structural kinematics of in-parallel- actuated robot-arms. ASME J Mechanism, Transmissions and Automation in Design, 1983, 105(4):705~712 [5] Pritschow G, Wurst K H. Systematic design of hexapods and other parallel link system[J]. CIRP Annals, 1997, 46(1):291~295 [6] 文福安,杨 光.并联机器人概述[J]. 机械科学与技术, 2000, 19(1):69~72 Wen Fuan, Yang Guang. The overview of parallel robot[J]. Mechanical Science and Technology, 2000, 19(1):69~72(in Chinese) [7] 王彬芳,温建勇,李建军,等. 基于3D组件的级进模CAD方法研究[J]. 模具技术, 2001(1):11~13 Wang Binfang, Wen Jianyong, Li Jianjun, et al. The research on the development of CAD for progressive dies based on 3D insert-groups[J]. Die Technology, 2001(1):11~13(in Chinese) [8] 孙守迁,包恩伟,潘云鹤. 基于组合原理的概念创新设计[J]. 计算机辅助设计与图形学学报,1999,11(3):262~265 Sun Shouqian, Bao Enwei, Pan Yunhe. Creative design based on combination principle for conceptual design[J]. J of CAD and Computer Graphics, 1999, 11(3):262~265(in Chinese) [9] 孟 飚. 并联机构组合式建模环境研究. 北京:清华大学精仪系,2002 Meng Biao. The study of combined modeling environment for parallel mechanism. Beijing:Dept. of Precision Instruments, Tsinghua Univ, 2002(in Chinese)
|