Research on feature extraction of impulse signal using Walsh transform

[1] 关肇直,陈文德.沃尔什函数与沃尔什变换[M].北京:国防工业出版社,1984 Guan Zhaozhi,Chen Wende. Walsh function and Walsh transform[M]. Beijing:Publishing House of Defense Industry, 1984 (in Chinese) [2] Loparo K A,Adams M L, Lin Wei,et al. Fault detection and diagnosis of rotating machinery. IEEE Transactions on Industrial Electronics, 2000.1005~1014 [3] Li Bo. Neural-network-based motor rolling bearing fault diagnosis. IEEE Transactions on Industrial Electronics, 2000.1060~1069 [4] Gilgurt S. Ya Al-Saborno Y N M. Discrete Walsh transform and diagnosis by low-frequency noises[J]. Engineering Simulation, Gordon & Breach Science Publ Inc, 1997,14(3):425~434 [5] 王 超,罗允同,许凌祥. 滚动轴承故障的沃尔什诊断法[J]. 应用力学学报, 1994, 11(2):33~39 Wang Chao,Luo Yuntong,Xu Lingxiang. Walsh diagnose method on rolling friction's fault [J]. Chinese Journal of Applied Mechanics, 1994, 11(2):33~39(in Chinese) [6] 李 青,周美莲,王能超. 快速变换软件设计的二分技术[J]. 数学杂志, 1998, 18 (增刊):91~94. Li Qing, Zhou Meilian,Wang Nengchao. Bisection technique of desiging fast transforms software[J]. Chinese Journal of Math, 1998, 18(Supplement):91~94 (in Chinese) [7] 邹 剑,陈 进,耿遵敏.小波包算法在柴油机振声征兆提纯中的应用[J].上海交通大学学报, 2002, 36(2):217~221 Zou Jian, Chen Jin, Geng Zunmin. Wavelet packets algorithmin diesel engines' vibro-acoustic xignatures extraction[J]. Journal of Shanghai Jiaotong University, 2002, 36(2):217~221(in Chinese) [8] 徐章遂,房立清,王希武,等. 故障信息诊断原理及应用[M].北京:国防工业出版社, 2001 Xu Zhangsui,Fang Liqing,Wang Xiwu,et al. Diagnosis principle and application for the fault information[M]. Beijing:Publishing House of Defense Industry, 2001(in Chinese) [9] 梅宏斌,林志航,吴 雅,等. 用于滚动轴承早期损伤诊断的模型及特征量. 振动工程学报, 1995, 8(3):191~197 Mei Hongbin, Lin Zhihang, Wu Ya,et al. A model and a feature parameter used in diagnosis of early defects in rolling element bearings[J]. Journal of Vibration Engineering, 1995, 8 (3):191~197 (in Chinese)