Modeling of Selective Laser Sintering for PC Powder

[1] 李晓明. 微粉与新型耐火材料[M]. 北京:冶金工业出版社,1997. 1~5. [2]Childs T H C,Berzins M,Ryder G R,et al. Selective laser sintering of an amorphous polymer ——simulation and experiments[J]. Proc Instn Mech Engrs,1999,213B:333~349. [3]Sun M M,Beaman J J. A three dimensional model for selective laser sintering. In Solid Freeform Fabrication Symposium. US:University of Texas,1991. 102~109. [4]Gaur U,Lau S F,Wunderlich B. Heat capacity and other thermodynamic properties of the linear macromolecules[J]. J Phys Chem Ref Data,1983,12:93. [5]Nelson J C,Xue S,Barlow J W,et al. Model of the selective laser sintering of bisphenol-A polycarbonate[J]. Ind Eng Chem Res,1993,32:2305~2317. [6]Yagi S,Kuni D. Studies on effective thermal conductivities in packed beds[J]. A I Ch E J,1957,3:83~95. [7]Nelson J C. Selective sintering:a definition of the process and an empirical sintering model. The University of Texas at Austin,1993. [8]赵保军,施法中,冯 涛,等. 选择性激光烧结粉末快速成型技术中的三维温度场分析[J]. 中国机械工程,2000,11(增刊):93~95. [9]Ozisik M N著.热传导[M]. 俞昌铭主译. 北京:高等教育出版社,1984. 506~540. [10] 俞昌铭 编著. 热传导及其数值分析[M]. 北京:清华大学出版社,1982. 392~454.