Experimental Research on Laser Bending Mechanism

[1] Namba Y. Laser forming in space .In:Wang C P,ed. Int Conf on Laser'85 , 1986. 403~407. [2]Scully K. Laser line heating[J]. Journal of Ship Production,1987(3):237~246. [3]Frackiewicz H. Shaping of tubes by laser beam .In:ISATA 25th , 1992.373~380. [4]Vollertsen F. Laser forming .In:Geiger M,Vollertsen F,eds. Proceedings of the LANE'94 . Bamberg:Meisenback, 1994. 81~92. [5]季 忠.板料激光弯曲成形及其数值模拟 .西安:西北工业大学材料科学与工程系,1997. [6]王秀凤,陈光南,胡世光. 板料激光成形技术[J]. 锻压技术,1998(6):32~34. [7]李纬民,Geiger M,Vollertsen F. 金属板材激光弯曲成形规律的研究[J]. 中国激光,1998,25(9):859~864. [8]王秀凤. 激光加工工艺参数对板料弯曲角度的影响[J]. 航空工程与维修,1999(4):41~42. [9]李纬民,李春科,刘助柏.激光弯曲工艺中板材厚度的影响规律[J].中国有色金属学报,1999,9(1):39~44. [10] 王秀凤,王秀彦,李纬民. 薄板激光弯曲成形的综述及应用 . 见:第八届全国锻压学术会议论文集 ,1999.273~276. [11]Vollertsen F. Mechanisms and models for laser forming . In:Geiger M, Vollertsen F,eds.Proceedings of the LANE'94 . Bamberg:Meisenback, 1994. 345~359. [12]Vollertsen F, Rodle M. Model for the temperature gradient mechanism of laser bending .In:Geiger M, Vollertsen F,eds. Proceedings of the LANE'94 . Bamberg:Meisenback, 1994. 371~378. [13]Holzer S, Arnet H, Geiger M. Physical and numerical modeling of the bucking mechanism . In:Geiger M, Vollertsen F,eds. Proceedings of the LANE'94 . Bamberg:Meisenback ,1994. 379~386. [14]Alberti N, Fratini L, Micari F. Numerical simulation of the laser bending process by a coupled thermal mechanical analysis . In:Geiger M, Vollertsen F,eds.Proceedings of the LANE'94 . Bamberg:Meisenback, 1994.327~336. [15]Kraus J. Basic processes in laser bending of extrusions using the upsetting mechanism . In:Geiger M, Vollertsen F,eds.Proceedings of the LANE'97 . Bamberg:Meisenback, 1997. 431~438. [16]Li Weimin . Numerical simulation for laser bending of sheet metal[J]. Chinese Journal of Mechanical Engineering,1998(4):277~282. [17]王秀凤,王秀彦,林道盛. 板料激光弯曲的试验研究[J]. 锻压机械,1999(3):8~10. [18]Geiger M, Vollertsen F, Deinzer G.Flexible straightening of car body shell by laser forming . SAE Paper no.930279,1993. 354~361.