Nonlinear Behavior of Separated Shear Layer of a Blunt Circular Cylinder

1. Ota T, Itasaka M. Separated and reattached flow on a blunt flat plate. ASME J Fluids Engng, 1976, 98:79~86 2. Kiya M, Sasaki K. Structure of a turbulent separation bubble. J Fluid Mech, 1983,137:83~113 3. Cherry N J, Hillier R, Latour M E M P. Unsteady measurements in a separated and reattaching flow. J Fluid Mech, 1984, 144:13~46 4. Sasaki K, Kiya M. Three-dimensional vortex structure in a leading-edge separation bubble at moderate Reynolds number. J Fluids Engng, 1991, 113:405~410 5. Bradshaw P, Wong F Y F. The reattachment and relaxation of a turbulent shear layer. J Fluid Mech, 1972, 52:113~135 6. Eaton J K, Johnston J P. Research on subsonic turbulent flow reattachment. AIAA J, 1981, 19(9):1093~1100 7. Ruderich R,Fernholz H H. An experimental investigation of a turbulent shear flow with separation, reverse flow, and reattachment. J Fluid Mech, 1986, 163:283~322 8. Gad-el-hak M, Blackwelder R F. On the discrete vortices from a delta wing.AIAA J, 1985, 23:961~962 9. Gad-el-hak M, Ho C M. Unsteady vortical flow around three dimensional lifting surfaces. AIAA J, 1986, 24(5):713~721[ZK)] 10. [ZK(#]Ota T. An axisymmetric separated and reattached flow on a longitudinal blunt circular cylinder. ASME J Appl Mech, 1975, 42:311~315 11. Ota T, Motegl H. Turbulence measurements in an axisymmetric separated and reattached flow over a longitudinal blunt circular cylinder. ASME J Appl Mech, 1980, 47:1~6 12. Kiya M, Mochizuki O, Tamura H, et al. Turbulence properties of an axisymmetric separation-and-reattaching flow. AIAA J, 1991, 29:936~941 13. 董宇飞.轴对称钝体分离流动及其控制:[学位论文].北京:北京大学力学系,1996