Citation: | Liu Fangjie. Methods of Analysis Failure of Squeeze Film Damper[J]. Journal of Beijing University of Aeronautics and Astronautics, 1998, 24(5): 533-537. (in Chinese) |
1. 刘方杰.挤压油膜阻尼器失效问题分析.北京航空航天大学学报,1998,24(3):295~300 2. Vance J M,Kirton J A.Experimental measurment of the dynamic force response of a squeeze film bearing damper.Trans ASME,J of Engineering for Industry,1975.1282~1290 3. Zeidan F Y,Vance J M.Cavitation leading to a two phase fluid in a squeeze film damper.Tribology Trans,1989,32(1):100~104 4. Magge N.Philosophy,design, and evaluation of soft-mounted engine rotol system.J Aircraft,1975,12(4):318~324 5. The Rolls Royce RB 211 three shaft turbofan.Aircraft Engineering,1968.22~26 6. Courage J B. Experimental study of an inter-shaft squeeze film bearing.I Mech E,1980.375~380 7. Brown P E.Bearings and dampers for advenced jet engine. SAE Paper,1970,79(2):998~1009 8. Feder E,Bansal P N,Blanco A.Investigation squeeze film damper forces produced by cicular centered orbits.Trans ASME,J Engineering for Power,1978,100:15~21 9. Hibner D H.Dynamic response of viscous-damped multi-shaft jet engine.J Aircraft,1975,12(4):305~312 10. Kirk R G,Hibner D H.A note on blade loss dynamic of rotor-bearing ystem.Trans ASME,J of Engineering for Industry,1976.497~504
|