Dexterity optimization based on orthogonal test of 3P3R grinding robot

[1] 黄云,黄智.砂带磨削的发展及关键技术[J].中国机械工程,2007,18:2263-2267 Huang Yun,Huang Zhi.Development and key technologies of abrasive belt grinding[J].China Mechanical Engineering,2007,18:2263-2267(in Chinese) [2] 王维朗,潘复生,陈延君,等.砂带磨削技术及材料的研究现状和发展前景[J].材料导报,2006,20(2):106-108 Wang Weilang,Pan Fusheng,Chen Yanjun,et al.Present research status and development prospect of abrasive belt grinding technique[J].Materials Review,2006,20(2):106-108(in Chinese) [3] Sun Y.Development of a comprehensive robotic grinding process .Storrs:School of Engineering,University of Connecticut,2004:6-16 [4] Sun Y,Giblin J,Kazerounian K.Accurate robotic belt grinding of workpieces with complex geometries using relative calibration techniques[J].Robotics and Computer-Integrated Manufacturing,2009,25(1):204-210 [5] 邢洪光,王利红,张玉茹.神经外科手术机器人灵活性分析[J].北京航空航天大学学报,2004,30(4):312-315 Xing Hongguang,Wang Lihong,Zhang Yuru.Dexterity analysis of robot for neurosurgery[J].Journal of Beijing University of Aeronautics and Astronautics,2004,30(4):312-315(in Chinese) [6] Yang Daniel C H,Lai Zone-Chang.On the dexterity of robotic manipulators-service angle[J].ASME Journal of Mechanisms,Transmissions,and Automation in Design,1985,107(3):162-270 [7] Song Shin-Min,Lei Chimeng,Wang Jiang.The end-effector angle and manipulator dexterous workspace[J].ASME Journal of Mechanical Design,1990,112(3):278-282 [8] 毕诸明.机器人姿态空间的分析与综合[J].机械科学与技术,1996,15(1):11-16 Bi Zhuming.Analysis and integration of robot posespace[J].Mechanical Science and Technology,1996,15(1):11-16(in Chinese) [9] Vijaykumar R,Waldron K,Tsai M.Geometric optimization of serial chain manipulator structures for working volume and dexterity[J].The International Journal of Robotics Research,1986:5(2):91-103 [10] 姜同川.正交试验设计[M].济南:山东科学技术出版社,1985:20-22 Jiang Tongchuan.Orthogonal tests design [M].Jinan:Shandong Science and Technology Press,1985:20-22(in Chinese)