On the high stress gradient and failure analysis of dovetail attachments

[1] 何明鉴.机械构件的微动疲劳[M].北京:国防工业出版社,1994 He Mingjian.Fretting fatigue of component[M].Beijing:National Defense Industry Press,1994(in Chinese) [2] 温卫东,高德平.榫头/榫槽接触问题边界元分析[J].航空动力学报,1992,7(2):117-120 Wen Weidong,Gao Deping.Analysis of tenon and mortise contact problems by boundary element methods[J].Journal of Aerospace Power,1992,7(2):117-120(in Chinese) [3] 郑旭东,蔚夺魁,王兆丰,等.某型航空发动机涡轮叶片和轮盘榫齿裂纹故障力学分析[J].航空发动机,2005,31(3):35-38 Zheng Xudong,Yu Duokui,Wang Zhaofeng,et al.Mechanical analysis of crack failures in turbine blade and disk serration of an aeroengine[J].Aeroengine,2005,31(3):35-38(in Chinese) [4] Sinclair G B,Cormier N G,Griffin J H,et al.Contact stresses in dovetail attachments:finite element modeling[J].Journal of Engineering for Gas Turbines and Power,2002,124:182-189 [5] Sinclair G B,Cormier N G.Contact stresses in dovetail attachments:physical modeling[J].Journal of Engineering for Gas Turbines and Power,2002,124:325-331 [6] Sinclair G B,Cormier N G.Contact stresses in dovetail attachments:alleviation via precision crowning[J].Journal of Engineering for Gas Turbines and Power,2003,125:1033-1041 [7] 古远兴.高低周复合载荷下燕尾榫结构微动疲劳寿命研究 .南京:南京航空航天大学能源与动力学院,2007 Gu Yuanxing.Research on fretting fatigue life of dovetail joint under HCF-LCF load .Nanjing:School of Power and Energy,Nanjing University of Aeronautics and Astronautics,2007(in Chinese) [8] 刘道新,刘军,刘元镛.微动疲劳裂纹萌生位置及形成方式研究[J].工程力学,2007,24(3):42-47 Liu Daoxin,Liu Jun,Liu Yuanyong.Study on nucleating location and formation of fretting fatigue cracks[J].Engineering Mechanics,2007,24(3):42-47(in Chinese) [9] 魏大盛,王延荣.榫连结构接触面几何构形对接触区应力分布的影响[J].航空动力学报,2010,25(2):407-411 Wei Dasheng,Wang Yanrong.Effects of the profile of contact surfaces on the stress distribution for tenon jointing in bladed-disk assemblies[J].Journal of Aerospace Power,2010,25(2):407-411(in Chinese) [10] Golden P J,Calcaterra J R.A fracture mechanics life prediction methodology applied to dovetail fretting[J].Tribology International,2006,39:1172-1180