Volume 36 Issue 10
Oct.  2010
Turn off MathJax
Article Contents
Gao Yong, Yang Lili, Zheng Lijing, et al. Influence of boron and carbon on the shrinkage defects of TiAl alloys[J]. Journal of Beijing University of Aeronautics and Astronautics, 2010, 36(10): 1217-1220. (in Chinese)
Citation: Gao Yong, Yang Lili, Zheng Lijing, et al. Influence of boron and carbon on the shrinkage defects of TiAl alloys[J]. Journal of Beijing University of Aeronautics and Astronautics, 2010, 36(10): 1217-1220. (in Chinese)

Influence of boron and carbon on the shrinkage defects of TiAl alloys

  • Received Date: 11 Dec 2009
  • Publish Date: 31 Oct 2010
  • Alloys whose nominal compositions were Ti-47Al-2Cr-2Nb, Ti-47Al-2Cr-2Nb-0.8B and Ti-47Al-2Cr-2Nb-0.1C were vacuum induction skull melted. Ingots were produced by pouring the molten alloys into a room-temperature graphite mold. Chemical compositions of ingots obtained were analyzed respectively. Microstructure as well as shrinkage cavity and porosity were also investigated with stereo microscope and scanning electron microscope (SEM). The results indicate that Ti-47Al-2Cr-2Nb alloy shows an intense columnar-growth tendency, and shrinkage porosity distributes dispersedly in the center zone around axis of ingot. Microstructure is refined and the columnar-growth tendency is weaken with the addition of 0.8% boron (atomic fraction). Shrinkage porosity becomes more concentrated to form a cavity in the center zone of ingots, and the density and size of micro porosity also decrease. However, the addition of 0.1% carbon (atomic fraction) doesn-t result in any apparent effects in terms of shrinkage porosity or microstructure compared to ingots without any additive.

     

  • loading
  • [1] Loria E A.Gamma titanium aluminides as prospective structural materials[J].Intermetallics,2000,8:1339-1345 [2] Lasalmonie A.Why is it so difficult to introduce them in gas turbine engines [J].Intermetallics,2006,14:1123-1129 [3] 林均品,陈国良.TiAl基金属间化合物的发展[J].中国材料进展,2009,28:31-37 Lin Junpin,Chen Guoliang.Development of TiAl intermetallic based compound[J].Matrerials China,2009,28:31-37(in Chinese) [4] Wu Xinhua.Review of alloy and process development of TiAl alloys[J].Intermetallics,2006,14:1114-1122 [5] Raymond J,Simpkins II,Michael P,et al.The effects of HIP pore closure and age hardening on primary creep and tensile property variations in a TiAl XDTM alloy with 0.1 wt% carbon[J].Materials Science and Engineering A,2007,463:208-215 [6] Liu K,Ma Y C,Gao M,et al.Single step centrifugal casting TiAl automotive valves[J].Intermetallics,2005,13:925-928 [7] Jovanovic M T.Microstructure and mechanical properties of precision cast TiAl turbocharger wheel[J].Journal of Materials Processing,2005,167:14-21 [8] 杨慧敏,苏彦庆,郭景杰,等.B元素对Ti-46Al和合金柱状晶组织的影响[J].金属学报,2008,44(10):1213-1218 Yang Huimin,Su Yanqing,Guo Jingjie,et al.Effects of B addition on the columnar structures of Ti-46Al and Ti-46Al-5Nb alloys[J].Acta Metallurgica Sinica,2008,44(10):1213-1218(in Chinese) [9] 苏彦庆,张莉,郭景杰.Hf、B耦合作用对Ti-46Al合金凝固组织演化的影响[J].特种铸造与有色合金,2009,29(4):295-298 Su Yanqing,Zhang Li,Guo Jingjie.Coupling effects of hafnium and boron additions on solidification structure evolution in Ti-46Al alloy[J].Special Casting & Nonferrous Alloys,2009,29(4):295-298(in Chinese) [10] 李书江,王艳丽,林均品,等.微量C,B对高铌合金显微组织与力学性能的影响[J].稀有金属材料与工程,2004,33(2):144-148 Li Shujiang,Wang Yanli,Lin Junpin,et al.Influence of C and B elements on structures and mechanical properties for high Nb containing TiAl alloy[J].Rare Metal Materials and Engineering,2004,33(2):144-148(in Chinese) [11] 董利民,崔玉友,杨锐.B和C对铸造TiAl基合金宏观和显微组织的影响[J].金属学报,2002,38:643-646 Dong Limin,Cui Yuyou,Yang Rui.Effects of B or C on the macro-and micro-structures of cast near gamma TiAl alloys[J].Acta Metallurgica Sinica,2002,38:643-646(in Chinese) [12] Godfrey A B.Grain refinement of a gamma-based titanium aluminide using microalloy additions. Birmingham:Interdisciplinary Research Centre in Materials,University of Birmingham,1996 [13] Cheng T T,Bate P S,Botten P R.Strain ageing and yield plateau phenomena in γ-TiAl based alloys containing boron[J].Sciripta Mater,1999,40:283-288 [14] Maziasz P J,Ramanujan R V,Liu C T.Effects of B and W alloying additions on the formation and stability of lamellar structure in two-phase γ-TiAl[J].Intermetallics,1997,5:83-95 [15] Melo M L N M,Rizzo E M S,Santos R G.Predicting dendrite arm spacing and their effect on microporosity formation in directionally solidified Al-Cu alloy[J].Journal of Material Science,2005,40:1599-1609
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views(3428) PDF downloads(1569) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return