State recognition of tool wear based on wavelet neural network

[1] Ghosh N,Ravi Y B,Patra A.Estimation of tool wear during CNC milling using neural network-based sensor fusion[J].Mechanical Systems and Signal Processing,2007,21(1):466-479 [2] 陈晓智,李蓓智,杨建国.一种新的声发射刀具磨损小波分析方法[J].无损检测,2007,29(1):12-15 Chen Xiaozhi,Li Beizhi,Yang Jianguo.A new wavelet analysis method for acoustic emission tool wear[J].Non-destructive Testing,2007,29(1):12-15(in Chinese) [3] Toshiyuki Obikawa,Jun Shinozuka.Monitoring of flank wear of coated tool in high speed machining with a neural network ART2[J].International Journal of Machine Tool & Manufacture,2004(44):1311-1318 [4] 吴桂峰,翟玉庆,陈虹,等.基于小波-神经网络的奠基振动故障诊断[J].控制工程,2004,11(2):152-154 Wu Guifeng,ZhaiYuqing,Chen Hong,et al.Based on wavelet-neural network vibration fault diagnosis of the ground-breaking[J].Control Engineering,2004,11(2):152-154(in Chinese) [5] 张德丰.MATLAB神经网络应用设计[M].北京:机械工业出版社,2009:291-293 Zhang Defeng.MATLAB neural network application design[M]. Beijing:Mechanical Industry Press,2009:291-293(in Chinese) [6] 李艳兰,蔚文杰.小波分析方法应用于故障诊断的研究[J].机械管理开发,2007(2):40-43 Li Yanlan,Wei Wenjie.Research on the application of wavelet analysis method in fault diagnosis[J].Mechanical Managment and Development,2007(2):40-43(in Chinese) [7] Timusk M,Lipsett M,Mechefske C K.Fault detection using transient machine signals[J].Mechanical Systems and Signal Processing,2008,22(7):1724-1749 [8] 张蓉谢,武杰.基于小波神经网络航空发动机滑油系统故障诊断方法研究[J].航空制造技术,2009(6):85-88 Zhang Rongxie,Wu Jie.Aero-engine oil system based on wavelet neural network fault diagnosis method[J].Aeronautical Manufacturing Technology,2009(6):85-88(in Chinese)