Citation: | Yuan Bifei, Lu Guiwu. Preparation of Al-Co codeposition coating on surface of Ni-based alloy[J]. Journal of Beijing University of Aeronautics and Astronautics, 2011, 37(1): 119-122. (in Chinese) |
[1] 田晓东,郭喜平.铌基超高温合金表面Si-Al 包埋共渗抗氧化涂层的组织形成[J].中国有色金属学报,2008,18(1):7-12 Tian Xiaodong,Guo Xiping.Structure formation of co-deposition of Si and Al coatings on advanced Nb-based ultrahigh temperature alloy by pack cementation process[J]. The Chinese Journal of Nonferrous Metals, 2008,18(1):7-12(in Chinese) [2] 王 禹,郜嘉平,李云鹏,等.铌合金硅化物涂层的结构及高温抗氧化性[J].无机材料学报,2000,15(1): 143-149 Wang Yu,Gao Jiaping,Li Yunping,et al.Microstructure and oxidation resistance of silicide coatings on niobium alloys[J].Journal of Inorganic Materials,2000,15(1): 143-149(in Chinese) [3] 赵陆翔,郭喜平,姜嫄嫄.铌基合金包埋渗法制备抗氧化硅化物涂层及其组织形成[J].中国有色金属学报,2007,17(4):596-601 Zhao Luxiang,Guo Xiping,Jiang Yuanyuan.Preparation and structural formation of oxidation-resistant silicide coatings on Nb-based alloy by pack cementation technique[J].The Chinese Journal of Nonferrous Metals,2007,17(4):596-601(in Chinese) [4] 刘培生.铝化物高温防护涂层的现状[J].稀有金属材料与工程,2003,32(9):681-685 Liu Peisheng.Status of study on high-temperature oxidation law for aluminide coatings[J].Rare Metal Materials and Engineering,2003,32(9):681-685(in Chinese) [5] 李 明,宋力昕,乐 军,等.铌表面固体粉末包埋渗硅研究[J].无机材料学报,2005,3(20): 764-767 Li Ming,Song Lixin,Le jun,et al.Microstructure and mechanism of pack siliconizing on niobium[J].Journal of Inorganic Materials,2005,3(20): 764-767(in Chinese) [6] 张鹏飞,李建平,蔡妍,等.K3 合金复合涂层高温防护性能研究[J].材料工程,2007,10:68-71 Zhang Pengfei,Li Jianping,Cai Yan,et al.Study of high temperature protective performance of composite coating on K3 superalloy[J]. Journal of Materials Engineering,2007,10:68-71(in Chinese) [7] Lu Tong,Yao Dengzun,Zhou Chungen.Low-temperature formation of aluminide coatings on Ni-base superalloys by pack cementation process[J].Chinese Journal of Aeronautics,2010,23(3):381-385 [8] 楼翰一.高温合金涂层与基体界面上的互扩散[J].中国腐蚀与防护学报,1997,17(5):464-469 Lou Hanyi.Interdiffusion between high temperature coating and superalloy substrate [J].Journal of Chinese Society For Corrosion and Protection,1997,17(5):464-469(in Chinese) [9] 杨世伟.K4104合金Al-Si涂层抗高温氧化性能研究 .哈尔滨:哈尔滨工程大学材料科学与化学工程学院,2006 Yang Shiwei.Research for high temperature oxidation properties of Al-Si coating on K4104 superalloy .Harbin:Colledge of Materials Science and Chemical Engineering,Harbin Institute of Technology,2006(in Chinese) [10] 李永作.K3合金Si-Al涂层的存在形式及分布[J].金属学报,1984,20(2):94-102 Li Yongzuo.The existent form and distribution of Si-Al coating on K3 super alloy[J]. Journal of Metals,1984,20(2):94-102(in Chinese) [11] 赵陆翔.铌硅化物基超高温合金包埋渗Si层的组织形成及高温抗氧化性能 .西安:西北工业大学材料学院,2007 Zhao Luxiang.Microstructural formation and high temperature oxidation resistance of pack siliconized coatings on an Nb silicide based alloy .Xi’an:School of Materials Science,Northwestern Polytechnical University, 2007(in Chinese) [12] Vialsi M,Francois M,Podor R.New silicides for new niobium protective coatings[J].Journal of Alloys and Compounds,1998,264: 244-251 [13] Suzuki R O,Ishikawa M,Ono K.NbSi2 coating on niobiumusing molten salt[J].Journal of Alloys and Compounds,2002,336: 280-284 [14] Xiang Z D,Datta P K.Pack aluminisation of low alloy steels at temperatures below 700℃[J].Surface and Coatings Technology,2004,184(1):108-115 [15] Xiang Z D,Rose S R,Datta P K.Low-temperature formation and oxidation resistance of nickel aluminide/nickel hybrid coatings on alloy steels[J].Scripta Materialia,2008,29(1): 99-102 [16] Zhao J C, Westbrook J H.Ultrahigh-temperature materials for jetengines[J].MRS Bulletin,2003,9:622-630 [17] Zhan Zhaolin,He Yedong,Wang Deren,et al.Preparation of aluminide coatings at relatively low temperatures[J].Transactions of Nonferrous Metals Society of China,2006,16(3):647-653 [18] Kuo D H,Huang K W.A new class of Ti-Si-C-N coatings obtained by chemical vapor deposition-part II:Low-temperature process[J].Thin Solid Films,2001,394(1-2):80-88 [19] Xiang Z D,Datta P K,Codeposition of Al and Si on nickel base superalloys by pack cementation process[J].Materials Science and Engineering A,2003,356:136-144
|