Design optimization and simulation of mechanical anti-load simulator

[1] Nam Yoonsu,Lee Jinyoung,Hong Sung Kyung.Force control system design for aerodynamic load simulator //IEEE Proceedings of the American Control Conference.Chicago:AACC,2000:3043-3047 [2] Walter Haeussermann.Developments in the field of automatic guidance and control of rockets[J].IEEE J Guidance and Control,1981,4(3):225-239 [3] 曹彤,孙杏初,欧阳沁,等.舵机反操纵负载台设计[J].北京航空航天大学学报,2003,29(3):252-254 Cao Tong,Sun Xingchu,Ouyang Qin,et al.Design of loading stand for reverse operation of navigating machine[J].Journal of Beijing University of Aeronautics and Astronautics,2003,29(3):252-254(in Chinese) [4] 王冰.基于ANSYS和ADAMS的舵机反操作力矩加载试验台的仿真分析与研究[J].军民两用技术与产品,2007(8):43-44 Wang Bing.Simulation analysis and research on loading stand for reverse operation of navigating machine with ANSYS & ADAMS[J].Dual Use Technologies & Products,2007(8):43-44 (in Chinese) [5] 郭蓉.平面连杆机构计算机辅助设计方法的研究 .合肥:合肥工业大学机械与车辆工程学院,2005 Guo Rong.Study on CAD System for plane linkage mechanism . Hefei:School of Mechanical and Automobile Engineering,Hefei University of Technology,2005(in Chinese) [6] 曲秀全.基于MATLAB/Simulink平面连杆机构的动态仿真[M].哈尔滨:哈尔滨工业大学出版社,2007 Qu Xiuquan.Dynamic simulation of planar linkage based on MATLAB/Simulink[M]. Harbin:Harbin Institute of Technology Press,2007(in Chinese) [7] Laribi M A,Romdhane L,Mlika A,et al.A combined genetic algorithm-fuzzy logic method (GA-FL) to design a 6 bars planar mechanism //ASME 7th Biennial Conference on Engineering Systems Design and Analysis.Manchester:ASME,2004:733-738 [8] Zhang Ke.Dynamics design of a planar controllable five bar mechanism based on genetic algorithm //ASME 2007 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference.Las Vegas:ASME,2007:821-827 [9] Li Rui,Chang Tian,Wang Jianwei,et al.Multi-objective optimization design of gear reducer based on adaptive genetic algorithms //International Electronic Conference on Computer Science.Beijing:AIP,2008:237-277 [10] Liu Tung-Kuan,Chen Chiu-Hung,Tsai Shang-En.Optimization on robot arm machining by using genetic algorithms //The 2007 International Conference on Mechatronics and Information Technologys.Gifu:SPIE,2007,679431:1-6 [11] Boudreau R,Gosselin C M.The synthesis of planar parallel manipulators with a genetic algorithm[J].ASME: Journal of Mechanical Design,1999,121(4):533-537 [12] Liu Yi,Mcphee John.Automated type synthesis planar mechanisms using numeric optimization with genetic algorithms[J].ASME:Journal of Mechanical Design,2005,127(5):910-916