Dynamic optimization method for valve plate structure of aviation piston pump

[1] Casoli P,Vacca A,Franzoni G,et al.Modelling of fluid properties in hydraulic positive displacement machines[J].Simulation Modelling Practice and Theory,2006,14:1059-1072 [2] Bolinger J W.Considerations for hydrostatic system noise control //SAE International off-Highway Meeting and Exposition.Milwaukee,WI:SAE,1982:29-41 [3] Ganesh K S,Monika Ivantysynova.Impact of valve plate design on noise,volumetric efficiency and control effort in an axial piston pump //ASME 2006 International Mechanical Engineering Congress and Exposition.Chicago,USA:Fluid Power Systems and Technology Division,2006:77-84 [4] 林静,孙明智.轴向柱塞泵配流盘结构对流量脉动的影响[J].流体传动与控制,2007,3(22):32-35 Lin Jing,Sun Mingzhi.Influence of port plate structure on flow fluctuation of axial piston pump[J].Fluid Power Transmission and Control,2007,3(22):32-35(in Chinese) [5] 马吉恩.轴向柱塞泵流体噪声及配流盘优化设计 .杭州:浙江大学机械工程学系,2009:117-128 Ma Jien.Study on flow ripple and valve plate optimization of axial piston pump .Hangzhou:Department of Mechanical Engineering,Zhejiang University,2009:117-128(in Chinese) [6] 那成烈,尹文波,那焱青.可压缩流体工作介质情况下轴向柱塞泵配流盘设计[J].甘肃工业大学学报,2002,28(4):65-67 Na Chenglie,Yin Wenbo,Na Yanqing.Design of valve plate of axial piston pump with compressible working medium [J].Gansu University of Technology,2002,28(4):65-67(in Chinese) [7] Manring N D.The discharge flow ripple of an axial-piston swash-plate type hydrostatic pump[J].Journal of Dynamic Systems,Measurement and Control,2000,122:263-268 [8] 那成烈,叶敏,孙淇余.轴向柱塞泵减振孔和减振槽的计算与特性分析[J].甘肃工业大学学报,1988,14(1):9-19 Na Chenglie,Ye Min,Sun Qiyu.Calculation and performance analysis of damping orifices and damping channels of axial piston pumps[J].Journal of Lanzhou University of Technology,1988,14(1):9-19(in Chinese) [9] 郭卫东,王占林.斜盘式轴向柱塞泵实际流量的分析研究[J].北京航空航天大学学报,1996,22(2):223-227 Guo Weidong,Wang Zhanlin.Analysis for the real flowrate of a swash plate axis piston pump[J].Journal of Beijing University of Aeronautics and Astronautics,1996,22(2):223-227(in Chinese) [10] 李玉琳.液压元件与系统设计[M].北京:北京航空航天大学出版社,1997:45-46 Li Yulin.Design of hydraulic component and system [M].Beijing:Beijing University of Aeronautics and Astronautics Press,1997:45-46(in Chinese) [11] 焦宗夏,路甬祥.新型的工程优化方法:旋转矢量法[J].机械工程学报,1996,32(6):45-50 Jiao Zongxia,Lu Yongxiang.New engineering optimization method-the rotatevector method[J].Chinese Journal of Mechanical Engineering,1996,32(6):45-50(in Chinese)