Method for measuring projection position of focal point based on space geometrical relations

[1] 张朝宗,郭志平,张朋,等.工业CT技术和原理\[M].北京:科学出版社,2009:3-10 Zhang Chaozong,Guo Zhiping,Zhang Peng,et al.Technique and principle of industrial CT[M].Beijing:Science Press,2009:3-10(in Chinese) [2] 张全红.X射线工业CT成像优化研究\ .北京:北京航空航天大学机械工程及自动化学院,2006 Zhang Quanhong.Optimization research on X-ray industrial CT imaging .Beijing:School of Mechanical Engineering and Automation,Beijing University of Aeronautics and Astronautics,2006(in Chinese) [3] Gullberg G T,Tsui B M,Crawford C R,et al.Estimation of geometrical parameters for fan beam tomography[J].Phys Med Biol,1987,32(12):1581-1594 [4] Gullberg G T,Tsui B M,Crawford C R,et al.Estimation of geometrical parameters and collimator evaluation for cone beam tomography[J].Med Phys,1990,17(2):264-272 [5] Strubel G,Clackdoyle R,Mennessier C,et al.Analytic calibration of cone-beam scanners //Yu B.2005 IEEE Nuclear Sciences Symposium Conference Record.Fajardo,PR:IEEE,2005:2731-2735 [6] Sun Yi,Hou Ying,Zhao Fengyong,et al.A calibration method for misaligned scanner geometry in cone-beam computed tomography[J].NDT&E International,2006,39:499-513 [7] Noo F,Clackdoyle R,Mennessier C,et al.Analytic method based on identification of ellipse parameters for scanner calibration in cone-beam tomography [J].Phy Med Biol,2000,45:3489-3508 [8] 李保磊,傅健,黄巧珍,等.一种基于正弦图的工业CT系统转台旋转中心自动确定方法\[J].航空学报,2009,30(7):1341-1345 Li Baolei,Fu Jian,Huang Qiaozhen,et al.Automatic calculation of turntable center based on sinograms in industrial CT systems[J].Acta Aeronautica et Astronautica Sinica,2009,30(7):1341-1345(in Chinese)