Citation: | Zhu Xijuan, Eriqitai Li, Jiajun Wangqiang, et al. Effect of micro-jets mixing enhancement on infrared radiation of plume[J]. Journal of Beijing University of Aeronautics and Astronautics, 2011, 37(4): 483-486. (in Chinese) |
[1] Wlezien R W,Kibens V.Influence of nozzle asymmetry on supersonic jets[J].AIAA J,1988,26(1):27-33 [2] Anjaneyulu K,James M,Donald B.Effect of slotting on the noise of an axisymmetric supersonic jet[J].AIAA J,1990,28:2136-2138 [3] 李家军,额日其太.脉冲射流强化圆柱喷流混合的三维数值模拟[J].北京航空航天大学学报,2007,33 (7):773-776 Li Jiajun,Eriqitai.Mixing enhancement in round jet exhaust using pulsed blowing:3-D numerical simulations [J].Journal of Beijing University of Aeronautics and Astronautics,2007,33(7):773-776(in Chinese) [4] 李挺,额日其太,李家军.微喷射流强化尾喷流混合的三维数值模拟[J].航空动力学报,2008,23(11):1966-1970 Li Ting,Eriqitai,Li Jiajun.Three dimensional numerical simulation of enhancing jet mixing with microjet[J].Journal of Aerospace Power,2008,23(11):1966-1970(in Chinese) [5] Chai J C,Lee H S,Patankar S V.Finite volume method for radiative heat transfer [J].J of Thermophysics and Heat Transfer,1994,8(3):419-425 [6] Chui E H,Raithby G D.Computation of radiant heat transfer on a nonorthogonal mesh using the finite volume method[J].Numerical Heat Transfer,Part B,1993,23:269-288 [7] 谈和平,夏新林,刘林华,等.红外辐射特性与传输的数值计算——计算热辐射学[M].哈尔滨:哈尔滨工业大学出版社,2006 Tan Heping,Xia Xinlin,Liu Linhua,et al.Numerical calculation of infrared radiation characteristics and transmission—calculation radiology [M].Harbin:Harbin Institute of Technology Press,2006(in Chinese) [8] 董士奎,余其铮,谈和平,等.燃烧产物二氧化碳高温辐射的窄谱带模型参数[J].航空动力学报,2001,16(4):355-359 Dong Shikui,Yu Qizheng,Tan Heping,et al.Narrow band model parameters of high temperature radiation for carbon dioxide of combustion products[J].Journal of Aerospace Power,2001,16(4):355-359(in Chinese) [9] 董士奎,谈和平,余其铮,等.300~3000K水蒸气红外辐射谱带模型参数[J].热能动力工程,2001,16(91):33-38 Dong Shikui,Tan Heping,Yu Qizhang,et al.Infrared radiative spectral band-model parameters for water vapor in the 300~3000K temperature range[J].Journal of Engineering for Thermal Energy and Power,2001,16(91):33-38(in Chinese) [10] Young S J.Nonisothermal band model theory [J].J of Quantitative Spectroscopy and Radiative Transfer,1976,18:1-28 [11] Ferziger J H,Peric M.Computational methods for fluid dynamics [M].Berlin:Springer,1996 [12] Behrouzi P,McGuirk J J.Jet mixing enhancement using fluid tabs[R].AIAA 2004-2401,2004
|
[1] | NI Chengzhi, LUO Haitao, LI Yuxin, LI Huadong, PEI Yucheng, ZHENG Peng. Active vibration suppression of MFC-driven deployable composite cylindrical shells[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2025.0181 |
[2] | WU Chengwei, BU Fanqiang, WANG Xingguo, SHI Yan, LI Xiaogao, SHEN Guolang. Laser ultrasonic techniques for the detection of interfacial delamination and debonding in multilayered composites: A review[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2025.0260 |
[3] | CHEN Jinghang, TIAN Yuyan, GAO Zhenxun. Numerical Investigation of compressibility corrections for turbulent mixing layer[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2025.0058 |
[4] | WANG C S,ZHANG X Y,ZHAN Z X,et al. Analysis of compression stability and load capacity of thick composite plate structures[J]. Journal of Beijing University of Aeronautics and Astronautics,2025,51(1):94-101 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0991. |
[5] | LIU G X,ZHANG J T,DING D D. Lossy point cloud geometry compression based on Transformer[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(2):634-642 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0412. |
[6] | YANG Z G,KE Z S,YANG X W,et al. Analysis of effect of construction process on electrical properties of composite skins[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(10):3013-3020 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0763. |
[7] | LU Ming-yu, ZHANG Ming, WEI Yu-xuan, LI Bo, CUI Zhi-gang, ZHANG Kai-hu. Characteristics and Homogenization Removal Methods of Ultraviolet Femtosecond Laser Processing of Aerospace AFRP Composite Materials[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2024.0096 |
[8] | LU G,ZHONG T X,GENG J. A Transformer based deep conditional video compression[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(2):442-448 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0374. |
[9] | PIAN Rong, YANG Fan, ZHANG Ling, LIU Feng-rui, WANG Lin-juan, ZHAO Li-bin. Failure mode study of composite laminated plates under compression-shear loading[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2024.0084 |
[10] | HOU R L,WANG C Y,ZHOU P. Tensile properties of rapid repaired CCF300/QY8911 laminates with broken hole damage[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(7):2172-2183 (in Chinese). doi: 10.13700/j.bh.1001-5965.2023.0485. |
[11] | RAN G L,MA Y H,AN Z Q,et al. Study of tensile properties of laminates containing microvascular channels with different diameters[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(4):1405-1415 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0490. |
[12] | LI Xing, LI Zeng-shan, DENG Fan-chen, NIE Lei, ZHANG Tian. Sub-model Based Failure Analysis of Composite Hybrid Joint Structure[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2023.0555 |
[13] | DONG H M,LI X G,MA X Q,et al. Research progress in mechanically fastened polymer-matrix composite joints with protruding-head bolts[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(4):745-760 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0682. |
[14] | WANG L Y,CHEN W H,JIANG Y S,et al. Measurement of ejection factor of new resin matrix composites[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(11):2960-2967 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0056. |
[15] | XU M R,ZENG B Y,XIONG X,et al. Tensile fatigue properties of carbon fiber laminates in hygrothermal environments[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(7):1614-1622 (in Chinese). doi: 10.13700/j.bh.1001-5965.2021.0565. |
[16] | XIONG Shichao, NI Jiacheng, ZHANG Qun, LUO Ying, WANG Yansong. 2-D compressed sensing SAR imaging based on mixed sparse representation[J]. Journal of Beijing University of Aeronautics and Astronautics, 2022, 48(11): 2314-2324. doi: 10.13700/j.bh.1001-5965.2021.0101 |
[17] | XIA Fei, XUE Jianghong, HE Zanhang, JIN Fusong. Interfacial crack growth of delaminated composite laminates under hygrothermal environment[J]. Journal of Beijing University of Aeronautics and Astronautics, 2022, 48(12): 2460-2472. doi: 10.13700/j.bh.1001-5965.2021.0137 |
[18] | ZHANG Chao, LIU Jianchun, FANG Xin. Damage analysis in composite laminates under low velocity oblique impact[J]. Journal of Beijing University of Aeronautics and Astronautics, 2022, 48(12): 2388-2397. doi: 10.13700/j.bh.1001-5965.2021.0154 |
[19] | Xu Menghui, Qiu Zhiping. Interval analysis and optimization for free vibration of all-composite lattice truss core sandwich beam[J]. Journal of Beijing University of Aeronautics and Astronautics, 2013, 39(8): 1079-1085. |
[20] | Yuan Kaihua, Qiu Zhiping. Flutter control of composite panels with embedded piezoelectric materials[J]. Journal of Beijing University of Aeronautics and Astronautics, 2009, 35(12): 1429-1433. |