Citation: | Chen Wensheng, Xu Xiaojian. Performance comparison among three super resolution direction finding algorithms based on virtual element interpolation[J]. Journal of Beijing University of Aeronautics and Astronautics, 2011, 37(5): 545-550,555. (in Chinese) |
[1] Krim H,Viberg M.Two decades of array signal processing research [J].IEEE Signal Processing Magazine,1996,13(4):67-94 [2] Fan H,El-Masry E I,Jenkins W K.Resolution enhancement of digital beamformers [J].IEEE Trans on Acoustics,Speech,and Signal Processing,1984,32(5):1041-1052 [3] Swingler D N,Walker R S.Line-array beamforming using linear prediction for aperture interpolation and extrapolation [J].IEEE Trans on Acoustics,Speech,and Signal Processing,1989,37(1):16-30 [4] Dogan M C,Mendel J M.Application of cumulants to array processing-part Ⅰ:aperture extension and array calibration [J].IEEE Trans on Signal Processing,1995,43(5):1200-1216 [5] Kim Y-Soo,Kim Y-Su.Improved resolution capability via virtual expansion of array [J].Electronics Letters,1999,35(19):1596-1597 [6] Wang Y,Chen H,Wan S.An effective DOA method via virtual array transformation [J].Science in China,2001,44(1):75-82 [7] Lan Y,Yang S.Virtual array method of beam forming [C] //Xu X.The 2nd International Workshop on Acoustical Engineering and Technology.Harbin:Harbin Engineering University Press,1999:29-30 [8] 吴湘霖,俞卞章,李会方,等.基于虚拟阵列的波达方向、载频和极化参数联合估计[J].电子与信息学报,2005,27(12):1887-1891 Wu Xianglin,Yu Bianzhang,Li Huifang,et al.A novel method for joint DOA-carrier-polarization estimation based on virtual array [J].Journal of Electronics & Information Technology,2005,27(12):1887-1891 (in Chinese) [9] 胡鹏.虚拟阵元波束形成方法研究[D].西安:西北工业大学航海学院,2006 Hu Peng.Study on beamforming algorithm of array with virtual elements [D].Xi’an:School of Marine Engineering,Northwestern Polytechnical University,2006(in Chinese) [10] 董国英,陶海虹,廖桂生.虚拟阵元解模糊的可行性分析[J].电子与信息学报,2010,32(6):1493-1496 Dong Guoying,Tao Haihong,Liao Guisheng.The feasibility analysis of ambiguity solving with virtual arrays [J].Journal of Electronics & Information Technology,2010,32(6):1493-1496 (in Chinese) [11] 陈欢,杨德森,张揽月,等.基于遗传算法的声矢量阵虚拟阵元波束形成[J].信号处理,2009,25(10):1498-1501 Chen Huan,Yang Desen,Zhang Lanyue,et al.Virtual array beam forming algorithm based on genetic algorithm of vector hydrophones [J].Signal Processing,2009,25(10):1498-1501 (in Chinese) [12] Donnet B J,Longstaff I D.MIMO radar,techniques and opportunities [C] // Proc of the 3rd European Radar Conference.London:Horizon House Publications,2006:112-115 [13] Cuomo K M,Piou J E,Mayhan J T.Ultrawide-band coherent processing [J].IEEE Trans on Antenna and Propagation,1999,47(6):1094-1107 [14] Xu X,Huang P,Feng X.An iterative algorithm for ultra wideband radar imaging from randomly fragmented spectral data [C] // Proc of the 2004 International Radar Conference.Paris:See,2004 [15] Cabrera S D,Parks T W.Extrapolation and spectral estimation with iterative weighted norm modification [J].IEEE Trans on Signal Processing,1991,39(4):842-851 [16] Akaike H.Modeling by shortest data description [J].Automatica,1978,14(5):465-471 [17] Roy R,Kailath T.ESPRIT-estimation of signal parameters via rotational invariance techniques [J].IEEE Trans on Acoustics,Speech,and Signal Processing,1989,37(7):984-995
|
[1] | CHEN Q,AN C,XIE C C,et al. Large deformation prediction and geometric nonlinear aeroelastic analysis based on machine learning algorithm[J]. Journal of Beijing University of Aeronautics and Astronautics,2025,51(3):943-952 (in Chinese). doi: 10.13700/j.bh.1001-5965.2023.0111. |
[2] | TIAN D K,ZHANG J W,JIN L,et al. Design and analysis of morphing wing mechanism based on equilateral Bennett mechanism[J]. Journal of Beijing University of Aeronautics and Astronautics,2025,51(3):742-752 (in Chinese). doi: 10.13700/j.bh.1001-5965.2023.0139. |
[3] | JI N,LIU J,WANG H R,et al. Simulation analysis and experimental study on stiffness and fatigue life fluctuation of leaf spring rubber bearings[J]. Journal of Beijing University of Aeronautics and Astronautics,2025,51(5):1726-1734 (in Chinese). doi: 10.13700/j.bh.1001-5965.2023.0263. |
[4] | PEI H N,CHEN Y F,BAI Z H,et al. Analysis of high load injury of thoracolumbar spine in pilots during ejection process[J]. Journal of Beijing University of Aeronautics and Astronautics,2025,51(1):102-112 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0957. |
[5] | CHEN Shi, XU He-ming, SUN Kai, XU Yi-han, ZHANG Yi-shang. Prediction of creep strain of turbine blades based on finite element nodes[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2023.0639 |
[6] | LI Zhi-qiang, WANG Yang, XIN Li-biao. Structural Design and Aerodynamic Performance Analysis of Gradient Hexagonal Deformable Wing Ribs[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2023.0669 |
[7] | LAI J Y,GUAN W Q,LUO G Z,et al. Design of rectangular cross-section spring anti-reverse device for a certain type of aviation[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(6):1868-1876 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0750. |
[8] | HU D D,ZHANG Z T,NIU G C. Lane line detection incorporating CBAM mechanism and deformable convolutional network[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(7):2150-2160 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0601. |
[9] | GENG Z W,ZHANG J,KONG N,et al. Design and analysis of space repeatable mechanical locking and electromagnetic unlocking mechanisms[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(12):3947-3956 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0918. |
[10] | YANG Z J,ZHANG C F,ZHAO R J,et al. Thermal deformation analysis and experimental verification of spatial deployable antenna hinge[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(1):243-249 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0219. |
[11] | FU T Y,YANG N,GU Y F,et al. Characterization of influence of fiber arrangement on CFRP induction heating curing process[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(1):198-207 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0259. |
[12] | HE T Y,DONG Y,WANG H,et al. Design and optimization of modular parabolic deployable mechanism[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(9):2473-2481 (in Chinese). doi: 10.13700/j.bh.1001-5965.2021.0652. |
[13] | YANG Z J,WANG G,ZHAO R J,et al. Dynamic analysis of deployment impact of trim-wing mechanism of Mars entry capsules[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(2):422-429 (in Chinese). doi: 10.13700/j.bh.1001-5965.2021.0234. |
[14] | GONG Xiaoquan, WU Xiaojun, TANG Jing, LI Ming, ZHANG Jian. Application of r-grid adaptive for shock capturing in discontinuous Galerkin finite element method[J]. Journal of Beijing University of Aeronautics and Astronautics, 2022, 48(10): 1889-1898. doi: 10.13700/j.bh.1001-5965.2021.0046 |
[15] | FU Baiheng, WANG Weijie, WANG Yuanqin, FAN Yahong, NIE Chen, JIA Haipeng. Design and analysis of high precision for spherical Lorentz force magnetic bearing[J]. Journal of Beijing University of Aeronautics and Astronautics, 2022, 48(11): 2222-2229. doi: 10.13700/j.bh.1001-5965.2021.0103 |
[16] | MA Runmei, ZHAO Xiang, CHEN Xiaozhu, LI Shuangxi, YANG Haichao. End face deformation and friction and wear of high-speed dry friction mechanical seal[J]. Journal of Beijing University of Aeronautics and Astronautics, 2022, 48(7): 1174-1182. doi: 10.13700/j.bh.1001-5965.2021.0005 |
[17] | GU Sucheng, WANG Baoxing, LIU Juncheng, LI Wei, CAO Yi. Deformation and end contact force of fiber-reinforced soft gripper[J]. Journal of Beijing University of Aeronautics and Astronautics, 2020, 46(2): 447-456. doi: 10.13700/j.bh.1001-5965.2019.0251 |
[18] | YANG Juntan, QIU Zhiping, LYU Zheng, LI Qi. Heat conduction analysis for simplified model of large scale space deployable structure[J]. Journal of Beijing University of Aeronautics and Astronautics, 2016, 42(3): 625-631. doi: 10.13700/j.bh.1001-5965.2015.0222 |
[19] | Zhang Yidu, Zhang Hongwei. Finite element simulation of machining deformation for aeronautical monolithic component[J]. Journal of Beijing University of Aeronautics and Astronautics, 2009, 35(2): 188-192. |
[20] | Dong Zhaowei, Zhang Yidu, Liu Shengyong. Residual stress simulation and analysis of milling process[J]. Journal of Beijing University of Aeronautics and Astronautics, 2005, 31(07): 762-765. |