Analysis of multi-parameters effect on Shupe error in fiber optic gyroscope fiber coil

[1] Yin S,Ruffin P B,Yu F T S.Fiber optic sensors [M].2nd ed.Boca Raton:CRC Press,2008:334-335 [2] Shupe D M.Thermally induced nonreciprocity in the fiber-optic interferometer [J].Applied Optics,1980,19(5):654-655 [3] Frigo N J.Compensation of linear sources of non-reciprocity in Sagnac interferometers // Moore E L.Fiber Optic and Laser Sensors: Proc of Technical Symp East.Arlington: Society of Photo Optical,1983: 268-271 [4] Mohr F.Thermooptically induced bias drift in fiber optical Sagnac interferometers [J].Journal of Lightwave Technology,1996,14(1):27-41 [5] Tirat O F J,Euverte J F M.Finite element model of thermal transient effect in fiber optic gyro // Udd E.Fiber Optic Gyros: 20th Anniversary Conference.Denver: SPIE-International Society for Optical Engine,1996: 230-238 [6] 孟照魁,崔佳涛,杜新政,等.光纤陀螺系统热建模及仿真 [J].北京航空航天大学学报,2007,33(6): 701-704 Meng Zhaokui,Cui Jiatao,Du Xinzheng,et al.Building model and simulation about heat of fiber optical gyroscope [J].Journal of Beijing University of Aeronautics and Astronautics,2007,33(6): 701-704(in Chinese) [7] 李茂春,刘铁根,王佳佳,等.光纤陀螺光纤环Shupe效应的三维有限元模型 [J].天津大学学报,2008,41(5):601-606 Li Maochun,Liu Tiegen,Wang Jiajia,et al.Three-dimensional finite element model of Shupe effect in FOG fiber coil [J].Journal of Tianjin University,2008,41(5):601-606(in Chinese) [8] Carlson K R,Cordova A,Rahn J P.Potting compound for fabrication of fiber optic gyro sensor coil and method for fabrication sensor: USA,6054068 .2000-04-25