Citation: | Chen Hui, Lang Lihui, Du Chuanjun, et al. Multi-stages necking process and mechanism of precision thin-walled can[J]. Journal of Beijing University of Aeronautics and Astronautics, 2011, 37(7): 805-810. (in Chinese) |
[1] Almeida B P P,Alves M L,Rosa P A R,et al.Expansion and reduction of thin-walled tubes using a die: Experimental and theoretical investigation[J].International Journal of Machine Tools and Manufacture,2006,46(12/13):1643-1652 [2] Alves L M,Martins P A F.Cold expansion and reduction of thin-walled PVC tubes using a die[J].Journal of Materials Processing Technology,2009,209(9):4229-4236 [3] 夏巨湛,王英,胡国安,等.薄壁管缩径挤压工艺的模拟分析与应用[J].石油机械,1997,25(3):18-21 Xia Juchen,Wang Ying,Hu Guoan,et al.Simulation and application of extrusion-sinking technology for thin-walled tube[J].CPM,1997,25(3):18-21(in Chinese) [4] Alves M L,Almeida B P P,Rosa P A R,et al.End forming of thin-walled tubes[J].Journal of Materials Processing Technology,2006,177(1/2/3):183-187 [5] Fatnassi A,Tomita Y,Shindo A.Non-axisymmetric wrinkling behavior of elastic-plastic circular tubes subjected to a nosing operation [J].International Journal of Mechanical Science,1985,27(10):643-651 [6] Jin Zhu.A new approach to preform design in shell nosing[J].Journal of Materials Processing Technology,1997,63(1/2/3):640-644 [7] Kim Youngsuk,Son Youngjin.Study on wrinkling limit diagram of anisotropic sheet metals[J].Journal of Materials Processing Technology,2000,97(1/2/3):88-94 [8] Reid S R,Harrigan J J.Transient effects in the quasi-static and dynamic internal inversion and nosing of metal tubes[J].International Journal of Mechanical Sciences,1998,40(2/3):263-280 [9] Lu Yuunghwa.Study of preform and loading rate in the tube nosing process by spherical die [J].Computer Methods in Applied Mechanics and Engineering,2005,194(25/26):2839-2858 [10] Avitzur B.Handbook of metal-forming process[M].New York:John Wiley & Sons,1983 [11] Alves L M,Pardal T C D,Martins P A F.Forming of thin-walled hollow spheres using sacrificial polymer mandrels[J].International Journal of Machine Tools and Manufacture,2009,49 (6):521-529
|