Advanced Search
Volume 37 Issue 11
Nov.  2011
Turn off MathJax
Article Contents
Journal of Beijing University of Aeronautics and Astronautics  > 2011  >  37(11): 1404-1409.
Gu Zhenpeng, Deng Hongwu, Tao Zhi, et al. Experiments of combined heat transfer in leading of blades at rotating state[J]. Journal of Beijing University of Aeronautics and Astronautics, 2011, 37(11): 1404-1409. (in Chinese)
Citation: Gu Zhenpeng, Deng Hongwu, Tao Zhi, et al. Experiments of combined heat transfer in leading of blades at rotating state[J]. Journal of Beijing University of Aeronautics and Astronautics, 2011, 37(11): 1404-1409. (in Chinese)
shu

Experiments of combined heat transfer in leading of blades at rotating state

  • National Key Laboratory on Aero-Engines, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

  • Received Date: 06 Jul 2010
  • Publish Date: 30 Nov 2011
    Abstract
  • Transient experiment was performed to study the heat transfer characteristic of impingement cooling with outflow film in the leading of turbine blades at rotating state. And, the effect of Coriolis forces and centrifugal forces on combined heat transfer effectiveness was discussed. The Reynolds number based on the inlet velocity of the impinging jet and hole diameter is 4 000. The Rotation number is from 0 to 0.139. Experiments' results show that the heat transfer effectiveness decreases with the Rotation number increasing. The average Nusselt number on the impingement face decreases 33%, and the average Nusselt number on the pressure face and the suction face decreases 20.5% and 7.5%, respectively. The effect of Coriolis forces enhance the spreading rate of the jet flow, which is mostly factor that result in heat transfer characteristic down. The effect of Coriolis forces together with centrifugal forces arouses the difference of heat transfer on pressure face and suction face at rotating state, and the average Nusselt number on the suction surface was larger than that on the pressure surface. The presence of the film holes changes the flow structure and gathers head the heat transfer effectiveness of films'border area.

     

    • FullText(HTML)
  • loading
    • References(1)
  • [1] General Motors Corporation.Laminated porous metal:USA,US3584972 .1971-06-15 [2] General Motors Corporation.Turbine blade:USA,US3619082 .1971-11-09 [3] General Motors Corporation.Cooled airfoil:USA,US3732031 .1973-05-08 [4] General Motors Corporation.Turbine cooling:USA,US3963368 .1976-06-15 [5] Rolls-Royce Limited.Cooling of aerofoil shaped blades:USA,US3620643 .1971-11-16 [6] Bunker R S,Metzger D E.Local heat transfer in internally cooled turbine airfoil leading edge regions:partⅠ-impingement cooling without film coolant extraction [J].Journal of Turbomachinery,1990,112:451-458 [7] Bunker R S,Metzger D E.Local heat transfer in internally cooled turbine airfoil leading edge regions: partⅡ-impingement cooling with film coolant extraction [J].Journal of Turbomachinery,1990,112:459-466 [8] Taslim M E,Pan Y.An experimental study of impingement on roughened airfoil leading edge walls with film holes[J].ASME Journal,2001,123:767-773 [9] Taslim M E,Bakhtari K,Liu H.Experimental and numerical investigations of impingement on a rib-roughened leading edge wall [J].ASME Journal,2003,125:682-691 [10] Hong S K,Lee D H,Cho H H.Effect of jet direction on heat/mass transfer of rotating impingement jet [J].Applied Thermal Engineering,2009,29(14-15):2914-2920 [11] 吴宏,陶智,徐国强.带气膜出流的旋转叶片冲击冷却的实验研究[J].航空动力学报,2000,15(4):375-380 Wu Hong,Tao Zhi,Xu Guoqiang.Experiments of impinging cooling in leading edges of rotating blades with outflow film [J].Journal of Aerospace Power,2000,15(4):375-380 (in Chinese) [12] 王开,徐国强,孙纪宁,等.冲击与气膜的组合形式对冷却效果的影响[J].北京航空航天大学学报,2008,34(7):751-754 Wang Kai,Xu Guoqiang,Sun Jining,et al.Effect of combined impingement cooling and film cooling onhybrid cooling effectiveness [J].Journal of Beijing University of Aeronautics and Astronautics,2008,34(7):751-754(in Chinese) [13] 王开,徐国强,陶智,等.进气方式对冲击与气膜组合冷却效果的影响[J].工程热物理学报,2008,29(7):1185-1188 Wang Kai,Xu Guoqiang,Tao Zhi,et al.Effect of plenum feed configurations on the cooling effectiveness in the hybrid cooling configuration [J].Journal of Engineering Thermophysics,2008,29(7): 1185-1188(in Chinese)
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views(2704) PDF downloads(750) Cited by()
    Proportional views
    Related

    Copyright © Journal of Beijing University of Aeronautics and Astronautics

    Address: Editorial Department of Journal of Beijing University of Aeronautics and Astronautics, 37 Xueyuan Road, Haidian District, Beijing Post Code: 100191 Email: jbuaa@buaa.edu.cn

    Supported by: Beijing Renhe Information Technology Co., Ltd.    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return