Method of modeling transient two-phase flow in injector

[1] He Yongling,Zhao Zhihe,Liu Jianxin,et al.Two-phase flow of liquid-gas in diesel fuel injection system and their effect on engine performances[J].International Journal of Thermal and Fluid Sciences,2001,10(3):223-227 [2] 徐波,张宗杰,戚茂国,等.柴油机多孔式喷油嘴中燃油三维流动分析[J].现代车用动力,2005,2:17-22 Xu Bo,Zhang Zongjie,Qi Maoguo,et al.Analysis of the flow in the nozzle of a multi-hole diesel engine injector[J].Modern Vehicle Power,2005,2:17-22(in Chineses) [3] 何志霞,王谦,李德桃,等,高压共轨喷油器内非稳态流动数值模拟分析[J].江苏大学学报,2007,28(2):142-146 He Zhixia,Wang Qian,Li Detao,et al.Numerical simulation of transient flow in high pressure common rail injector[J].Journal of Jiangsu University,2007,28(2):142-146(in Chinese) [4] 汪翔,苏万华.空化过程对柴油喷嘴内流特性的影响[J].内燃机学报,2007,25(6):481-487 Wang Xiang,Su Wanhua.The influence of cavitation processes on the internal flow characteristics of diesel injector nozzle[J].Trandaction of CSICE,2007,25(6):481-487(in Chinese) [5] Lee W G,Reitz R D.A numerical investigation of transient flow and cavitation within minisac and VCO diesel injector nozzles //Proceedings of ASME Internal Combustion Engine Division 2009 Spring Technical Conference.Wisconsin Milwaukee,USA:ICES2009,2009:643-652 [6] Som S,Aggarwal S K,EI-Hannouny E M,et al.Investigation of nozzle flow and cavitation characteristics in a diesel injector[J].Journal of Engineering for Gas Turbines and Power,2010,132:042802 [7] 张思超.柴油机喷油系统油气两相流模拟研究 .北京:北京航空航天大学交通科学与工程学院,2008 Zhang Sichao.Simulation research of fuel-gas two-phaseflow in the fuel injection system of diesel engine .Beijing: School of Transportation Science and Engineering,Beijing University of Aeronautics and Astronautics,2008(in Chinese)