Integrated analysis of aerothermal-aeroelastic wings in hypersonic flow

[1] McNamara J J,Friedmann P P.Aeroelastic and aerothermoelastic analysis of hypersonic vehicles: current status and future trends .AIAA 2007-2013,2007 [2] McNamara J J,Friedmann P P,Thuruthimattam B J. Aeroelastic and aerothermoelastic behavior in hypersonic flow[J].AIAA Journal,2008,46(10): 2591-2610 [3] Thuruthimattam B J,Friedmann P P,Powell K G. Aeroelasticity of a generic hypersonic vehicle .AIAA 2002-1209,2002 [4] 吴志刚,惠俊鹏,杨超.高超声速下翼面的热颤振工程分析[J].北京航空航天大学学报,2005,31(3): 270-273 Wu Zhigang,Hui Junpeng,Yang Chao. Hypersonic aerothe-rmoelastic analysis of wings[J].Journal of Beijing University of Aeronautics and Astronautics,2005,31(3): 270-273(in Chinese) [5] Roger M. Aerothermoelasticity[J].AeroSpace Engineering,1958(10):34-43 [6] 许赟.高超声速飞行器气动弹性问题研究 .北京:北京航空航天大学航空科学与工程学院,2009 Xu Yun. Studies on aeroelasticity of hypersonic vehicles .Beijing:School of Aeronautics Science and Engineering,Beijing University of Aeronautics and Astronautics,2009(in Chinese) [7] Spain C,Soistmann V,David L,et al. An overview of selected NASP aeroelastic studies at the NASA Langley Research Center .A-90-5218,1990 [8] Loehner R,Yang C,Cerbal J. et al. Fluid-structure-thermal interaction using a loose coupling algorithm and adaptive unstructured grids .AIAA 1998-2419,1998 [9] 吕丽丽,张伟伟,叶正寅.高超声速再入体表面热流计算[J].应用力学学报,2006,23(2): 259-262 Lü Lili,Zhang Weiwei,Ye Zhengyin. Hypersonic surface heat flux computation of reentry vehicles[J].Chinese Journal of Applied Mechanics,2006,23(2): 259-262(in Chinese) [10] 吴子牛,王兵,周睿.空气动力学:上册[M].北京:清华大学出版社,2007:407-417 Wu Ziniu,Wang Bing,Zhou Rui. Aerodynamics:Volume l[M].Beijing: Tsinghua University Press,2007:407-417(in Chinese) [11] Ericsson L E,Almroth B O,Bailie J A. Hypersonic aerothermoelastic characteristics of a finned missile[J].Journal of Aircraft,1979,16(3): 187-192 [12] 廖日东,左正兴,邹文胜,等.增压器涡轮叶片模态特性研究[J].内燃机学报,1998,16(4): 421-429 Liao Ridong,Zuo Zhengxing,Zou Wensheng,et al. The modal characteristic study of turbine blades[J].Transactions of CSICE,1998,16(4): 421-429(in Chinese)