Citation: | Yu Mei, Chen Gaohong, Liu Jianhua, et al. Adipic-sulfuric acid anodizing for LY12CZ aluminum alloy[J]. Journal of Beijing University of Aeronautics and Astronautics, 2012, (3): 363-367,379. (in Chinese) |
[1] |
王祝堂,田荣璋.铝合金及其加工手册[M].长沙:中南大学出版社,2000
Wang Zhutang,Tian Rongzhang.Manual process of aluminum alloys[M].Changsha:Central South University Press,2000 (in Chinese) |
[2] |
周育红,韩喜江,周德瑞,等.铝及铝合金阳极氧化膜的封闭技术[J].哈尔滨工业大学学报,2003,35(11):1325-1327
Zhou Yuhong,Han Xijiang,Zhou Derui,et al.Techniques used for sealing of anodized aluminum and aluminum alloys[J].Journal of Harbin Institute of Technology,2003,35(11):1325-1327(in Chinese) |
[3] |
蔡健平,李斌,刘明辉,等.阳极化对航空铝合金疲劳性能的影响[J].航空材料学报,2007,27(2):25
Cai Jianping,Li Bin,Liu Minghui,et al.Effect of anodizing on fatigue performance of aeronautic aluminum alloys[J].Journal of Aeronautical Materials,2007,27(2):25(in Chinese) |
[4] |
文斯雄.铝和铝合金宽温快速阳极氧化[J].航空制造技术,2005,1:108
Wen Sixiong.Wide temperature range and rapid anodic oxidation of Al and Al alloy[J].Aeronautical Manufacturing Technology,2005,1:108(in Chinese) |
[5] |
Dattilo A.Anodizing process with low environmental impact for a workpiece of aluminum or aluminum alloy:Italy,EP1233084 A2[P].2002-08-21
|
[6] |
Kubota,Shizuoka,Inukai,et al.Method for anodizing aluminum materials:United States,5851373 A1[P].1998-12-22
|
[7] |
Domingues L,Fernandes J C S,Ferreira M G S,et al.Anodising of Al 2024-T3 in a modified sulphuric acid/boric acid bath for aeronautical applications[J].Corrosion Science,2003,45(3):149-160
|
[8] |
Thomspon G E,Zhang L,Smith C J E,et al.Boricy sulfuric acid anodizing of aluminum alloys 2024 and 7075:film growth and corrosion resistance[J].Corrosion Science Section,1999,55(3):11-20
|
[9] |
Curioni M,Skeldon P,Koroleva E.Role of tartaric acid on the anodizing and corrosion behavior of AA2024 T3 aluminum alloy[J].Journal of the Electrochemical Society,2009,156(4):147-153
|
[10] |
Gregory B,Nadine P,Catherine D.FESEM and EIS study of sealed AA2024 T3 anodized in sulfuric acid electrolytes:influence of tartaric acid[J].Journal of the Electrochemical Society,2008,155(11):521-529
|
[11] |
刘建华,李明,李松梅,等.挤压成型对LC4CS铝合金棒材阳极氧化膜结构的影响[J].航空材料学报,2009,30(2):368-373
Liu Jianhua,Li Ming,Li Songmei,et al.Effect of extrusion on microstructure of anodic oxide films formed on LC4CS aluminium alloy bars[J].Acta Aeronautical Materials,2009,30(2):368-373(in Chinese) |
[12] |
Liu Jianhua,Li Ming,Li Songmei,et al.Effect of microstructure of anodic oxide formation in sulfuricacid[J].International Journal of Mineals,Metallurgy and Materials,2009,16(4):432-438
|
[13] |
HB5287-96 金属材料轴向加载疲劳试验方法[S]
HB5287-96 Axial load fatigue testing of metal materials[S] (in Chinese) |
[14] |
Habazaki H,Zhou X,Shimizu K,et al.Mobility of copper ions in anodic alumina films[J].Electrochimica Acta,1997,42:2627-2635
|
[15] |
Moutarlier V,Gigandet M P,Pagetti J.Charactetisation of pitting corrosion in sealed anodic films formed in sulphuric,sulphuric/molybdate and chromic media[J].Applied Surface Science,2003,206(6):237-249
|
[16] |
Fanny S,Christine B,Georges M,et al.Characterisation of sealed anodic films on 7050 T74 and 2214 T6 aluminium alloys[J].Surface and Coatings Technology,2002,154(2):94
|
[17] |
Ali M,Graeme E.Determination of fatigue related discontinuity state of 7000 series of aeroapace aluminum alloys[J].Engineering Fatigue Analysis,2007,14(8):673-685
|
[18] |
Suay J J,Gimenez E,Rodriguez T,et al.Characterization of anodized and sealed aluminium by EIS[J].Corrosion Science,2003,45(21):611-624
|
[19] |
赵军,朱建龙,薛花娟,等.阳极氧化对7075铝合金疲劳性能的影响[J].南京航空航天大学学报,2008,40(3):412
Zhao Jun,Zhu Jianlong,Xue Huajuan,et al.Effects of anodizing methods on behavior of 7075 aluminum alloy[J].Journal of Nanjing University of Aeronautics and Astronautics,2008,40(3):412(in Chinese) |
[20] |
Al-Rubaie K S,Del Grande M A,Travessa D N,et al.Effects of pre-strain on the fatigue life of 7050-T7451 aluminum alloy[J].Materials Science and Engineering A,2007,464(3):141-150
|