Song Wenbo, Li Huanxi, Lü Mingyun, et al. Effects of thickness and environmental factors on conductivity of composite coatings[J]. Journal of Beijing University of Aeronautics and Astronautics, 2005, 31(12): 1351-1354. (in Chinese)
Citation: Wang Xinghao, Ma jiming, Zeng Shengkui, et al. Hybrid reliability analysis method based collaborative optimization[J]. Journal of Beijing University of Aeronautics and Astronautics, 2012, (4): 525-528,534. (in Chinese)

Hybrid reliability analysis method based collaborative optimization

  • Received Date: 24 Dec 2010
  • Publish Date: 30 Apr 2012
  • The reliability analysis in the multidisciplinary design optimization (MDO) process causes great computational cost. Aiming to this problem,two kinds of existing reliability analysis methods were integrated into the collaborative optimization(CO), and hybrid reliability analysis based CO method was proposed. This method analyzes the reliability in the subsystem of CO model, and before each reliability analysis, the distance between the iteration point and constrained boundary was estimated. For the point near the constrained boundary,the first order reliability method was applied to analyze the reliability, while the mean value method was applied to analyze the reliability approximately for the other points to reduce the unnecessary analysis cost, then this hybrid reliability analysis process was integrated into the CO framework. Experimental results show that the hybrid reliability analysis based CO method improves the optimization efficiency without decreasing the accuracy of reliability and it has practical significance for engineering application.

     

  • [1]
    Sobieszczanski-Sobieski,J,Haftka R T.Multidisciplinary aerospace design optimization: survey of recent developments [J].Structural Optimization,1997,14(1):1-23
    [2]
    Kroo I M,Manning Valerie.Collaborative optimization:status and directions [C]//Proc of the 8th AIAA/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization.Long Beach:AIAA,2000
    [3]
    Sue R H,Oakley D R,Rhodes G S.Multidisciplinary stochastic optimization [C]//Proc of the 10th Conference on Engineer Mechanics Part 2,Vol 2.Boulder,CO:ASME,1995:934-937
    [4]
    Liao G,Kim H M,Ha C.Multilevel optimization considering variability in design variables of multidisciplinary system [C]//Proceedings of the 11th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization.Portsmouth,Virginia,USA: AIAA,2006
    [5]
    Padamanabhan D,Batill S M.An iterative concurrent subspace robust design framework [C]//Proc of 8th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization.Long Beach,California:AIAA,2000:133-138
    [6]
    Fan Hui,Li Weiji.An efficient method for reliability-based multidisciplinary design optimization [J].Chinese Journal of Aeronautics,2008,21(4):335-340
    [7]
    Du Xiaoping,Guo Jia,Beeram Harish.Sequential optimization and reliability assessment for multidisciplinary systems design [J].Struct Multidisc Optim,2008,35:117-130
    [8]
    Li Liansheng,Jing Shikai,Liu Jihong.A hierarchical hybrid strategy for reliability analysis of multidisciplinary design optimization [C]//Proceedings of the 2010 14th International Conference on Computer Supported Cooperative Work in Design.Shanghai: IEEE,2010:525-530
    [9]
    张建国,苏多,刘英卫.机械产品可靠性分析与优化[M].北京:电子工业出版社,2008 Zhang Jianguo,Su Duo,Liu Yingwei.Reliability analysis and optimization of mechanical products [M].Beijing: Publishing House of Electronics Industry,2008(in Chinese)
    [10]
    Kodiyalam S.Evaluation of methods for multidisciplinary design optimization (MDO),Phase I [R].NASA/CR-1998-208716,1998
  • Relative Articles

    [1]CAI S Y,HAO F W,SHI T. Partition based on features of neighborhood points and corresponding point cloud registration of aero-engine damaged blade[J]. Journal of Beijing University of Aeronautics and Astronautics,2025,51(3):784-794 (in Chinese). doi: 10.13700/j.bh.1001-5965.2023.0081.
    [2]GE Jian-hao, GUO Jie, WANG Hao-ning, ZHANG Bao-chao, WAN Yang-yang, TANG Sheng-jing. Adaptive model predictive control for hypersonic morphing gliding vehicle[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2024.0081
    [3]LI H G,WANG Y F,YANG L C. Meta-learning-based few-shot object detection for remote sensing images[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(8):2503-2513 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0637.
    [4]LIU Y X,LIU Z H,GAO Q H,et al. Joint estimation algorithm of vertical force and lateral force of heavy-duty tire based on internal strain analysis of tire[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(11):3532-3541 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0816.
    [5]BAI Xiao-tian, ZHANG Zhao-nan, SHI Huai-tao, ZHANG Xiao-chen. Study on the Identification of Sub-surface Mesoscopic Fault Scales of Full Ceramic Ball Bearings Based on Strain Energy Theory on the Outer Ring[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2023.0715
    [6]HAN Y,SUN B B,WANG J G,et al. Target person analysis based on critical node recognition algorithm[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(7):2074-2082 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0588.
    [7]LI R G,ZHU J W,WU F D,et al. A decision tree-based discovery method for Bitcoin unreachable nodes[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(6):1861-1867 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0558.
    [8]SUN Bing, CHEN Wei. Finite time robust control of morphing aircraft based on time-varying gain observer[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2023-0704
    [9]YANG Gong-peng, ZHOU Zheng-gan, MA Teng-fei, WANG Jun, LI Yang, ZHOU Wen-bin. Research on finite element simulation modeling for ultrasonic testing of coarse-grained materials[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2023.0676
    [10]WU Yu-zhan, LI Chen-long, GONG Guang-hong, LU Jun-yan. Finite-time path tracking control of unmanned vehicles based on multi-dimensional Taylor network[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2023.0610
    [11]GUO S N,SONG W,XIANG N L,et al. Dynamic characteristics of turbine flowmeter based on CFD simulation[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(8):1904-1911 (in Chinese). doi: 10.13700/j.bh.1001-5965.2021.0594.
    [12]XIE C C,ZHU L P,MENG Y,et al. Design of adaptive deformation wing control system based on system identification[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(10):2761-2770 (in Chinese). doi: 10.13700/j.bh.1001-5965.2021.0717.
    [13]XU Q Y,MENG Y,LI S. Strain-based geometrically nonlinear beam modeling and analysis[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(8):2039-2049 (in Chinese). doi: 10.13700/j.bh.1001-5965.2021.0627.
    [14]SUN Xiao-kun, CHEN Yang, HU Can-bin, XIANG De-liang. SAR target recognition method under limited measured sample conditions[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2023.0648
    [15]LEI J Y,LEI Q N,LI H B,et al. A mesh parameterization method and life reliability-based optimization for turbine blade[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(10):2651-2659 (in Chinese). doi: 10.13700/j.bh.1001-5965.2021.0708.
    [16]YU Yang-yi, YANG Yi-gang. Research on bi-modal imaging method for detection of residual core in hollow turbine blades[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2023.0526
    [17]HAN X,WANG Y X,CHENG X C,et al. A decentralized multi-sensor fusion estimator using finite memory buffers[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(2):335-343 (in Chinese). doi: 10.13700/j.bh.1001-5965.2021.0240.
    [18]ZHANG Yuan, HUANG Wanwei, LU Kunfeng, BAI Wenyan, YU Jianglong. Modeling and finite-time control for hypersonic morphing flight vehicle[J]. Journal of Beijing University of Aeronautics and Astronautics, 2022, 48(10): 1979-1993. doi: 10.13700/j.bh.1001-5965.2021.0701
    [19]HONG Zheng, YE Zhengyin. Numerical investigation on evolution of T-S wave on a two-dimensional compliant wall with finite length[J]. Journal of Beijing University of Aeronautics and Astronautics, 2022, 48(7): 1190-1199. doi: 10.13700/j.bh.1001-5965.2021.0030
    [20]GONG Xiaoquan, WU Xiaojun, TANG Jing, LI Ming, ZHANG Jian. Application of r-grid adaptive for shock capturing in discontinuous Galerkin finite element method[J]. Journal of Beijing University of Aeronautics and Astronautics, 2022, 48(10): 1889-1898. doi: 10.13700/j.bh.1001-5965.2021.0046
  • Created with Highcharts 5.0.7Amount of accessChart context menuAbstract Views, HTML Views, PDF Downloads StatisticsAbstract ViewsHTML ViewsPDF Downloads2024-052024-062024-072024-082024-092024-102024-112024-122025-012025-022025-032025-0405101520
    Created with Highcharts 5.0.7Chart context menuAccess Class DistributionFULLTEXT: 22.4 %FULLTEXT: 22.4 %META: 72.4 %META: 72.4 %PDF: 5.1 %PDF: 5.1 %FULLTEXTMETAPDF

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views(2306) PDF downloads(503) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return