Cao Yu, Zhang Zuoguang, Zhao Weijuanet al. Mobility behavior for driving bubble traversing constricted capillary tubes[J]. Journal of Beijing University of Aeronautics and Astronautics, 2006, 32(07): 847-851. (in Chinese)
Citation: Yan Chongnian, Fan Zhou, Cheng Xiaoquan, et al. Compressive behaviour of composite cylindrical shell with open hole[J]. Journal of Beijing University of Aeronautics and Astronautics, 2012, (7): 920-924. (in Chinese)

Compressive behaviour of composite cylindrical shell with open hole

  • Received Date: 13 Jul 2011
  • Publish Date: 30 Jul 2012
  • The compressive behavior of one-third composite cylindrical shell with opening reinforcement was studied under a compress load. The reinforced specimen was tested and failed in buckling at 65.922 kN near the open hole. A finite element model was established in ABAQUS to investigate the buckling behavior of the composite cylindrical shell. The computational results and experimental results of buckling failure mode and buckling load were compared to verify the validity of the finite element model. The results show that as opening area increases, the buckling load of the shell without reinforcement does not decrease progressively. However, in a certain range of opening area, the structure gets maximum and minimum buckling load values. While in the case of reinforcement, with the opening area being constant, the buckling load is in direct proportion with opening height, and is in inverse proportion with opening width. To considering design and workmanship, opening height should be increased.

     

  • [1]
    李钟海,程小全,杨琨,等.复合材料柱面壳压缩性能分析[J].复合材料学报,2011,28(1):206-210
    Li Zhonghai,Cheng Xiaoquan,Yang Kun,et al.Composite properties analysis of composite cylindrical shell [J].Acta Materiae Compositae Sinica,2011,28(1):206-210(in Chinese)
    [2]
    李致敏.三维编织复合材料圆柱壳轴压下的屈曲分析[J].强度与环境,2007,34(4):123-127
    Li Zhimin.Buckling analysis of three dimensional braided composite cylindrical shells under axial compression [J].Structure and Environment Engineering,2007,34(4):123-127(in Chinese)
    [3]
    Tan Qiang,Liao Xiaoyun,Gao Zhan.Stacking sequence opti-mization of laminated composite cylinder shell for maximal buckling load [J].Chinese Journal of Mechanical Engineering,2008,21(4):156-162
    [4]
    张苗苗,王丹,张卫红.带孔圆柱壳轴压屈曲与孔型优化[J].科学技术与工程,2011,11(9):56-61
    Zhang Miaomiao,Wang dan,Zhang Weihong.Buckling analysis and shape optimization of cylinder shells with holes under axial compression[J].Science Technology and Engineering,2008,21(4):156-162(in Chinese)
    [5]
    杨金花,傅衣铭.具脱层复合材料层合圆柱壳的屈曲分析[J].湖南大学学报:自然科学版,2005,32(5):34-39 Yang Jinhua,Fu Yiming.Buckling Analysis of Composite Laminated Cylindrical Shell with Delamination [J].Journal of Hunan University:Natural sciences,2005,32(5):34-39(in Chinese)
    [6]
    Tafreshi Azam.Efficient modeling of delamination buckling in composite cylindrical shell under axial compression [J].Composite Structures,2004,64 (3/4):511-520
    [7]
    李钟海,程小全,张纪奎.开口复合材料柱壳屈曲与补救有限元分析[J].应用力学学报,2011,28(2):172-176
    Li Zhonghai,Cheng Xiaoquan,Zhang Jikui.Finite element analysis of buckling and salvage of a composite cylindrical shell with an open hole [J].Chinese Journal Applied Mechanics,2011,28(2):172-176(in Chinese)
    [8]
    Vaziri A.On the buckling of cracked composite cylindrical shells under axial compression [J].Composite Structures,2007,80(1):152-158
    [9]
    Christos C C,Minnetyan L.Defect/damage tolerance of pressurized fiber composite shells [J].Composite Structures,2001,51(2):159-168
    [10]
    Chamis C C,Minnetyan L.Defect/damage tolerance of pressurized fiber composite shell [J].Composite Structures,2001,51(2):159-168
    [11]
    王蔓,白瑞祥,杨继新.碳纤维增强聚合物基复合材料修补空心柱体结构的屈曲分析[J].大连工业大学学报,2010,2(4):234-239
    Wang Man,Bai Ruixiang,Yang Jixin.Bucking analysis of hollow cylinder structure strengthened with CFRP laminates [J].Journal of Dalian Institute of Light Industry,2010,2(4):234-239(in Chinese)
  • Relative Articles

    [1]NI Chengzhi, LUO Haitao, LI Yuxin, LI Huadong, PEI Yucheng, ZHENG Peng. Active vibration suppression of MFC-driven deployable composite cylindrical shells[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2025.0181
    [2]WU Chengwei, BU Fanqiang, WANG Xingguo, SHI Yan, LI Xiaogao, SHEN Guolang. Laser ultrasonic techniques for the detection of interfacial delamination and debonding in multilayered composites: A review[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2025.0260
    [3]WANG C S,ZHANG X Y,ZHAN Z X,et al. Analysis of compression stability and load capacity of thick composite plate structures[J]. Journal of Beijing University of Aeronautics and Astronautics,2025,51(1):94-101 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0991.
    [4]PIAN Rong, YANG Fan, ZHANG Ling, LIU Feng-rui, WANG Lin-juan, ZHAO Li-bin. Failure mode study of composite laminated plates under compression-shear loading[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2024.0084
    [5]LU Ming-yu, ZHANG Ming, WEI Yu-xuan, LI Bo, CUI Zhi-gang, ZHANG Kai-hu. Characteristics and Homogenization Removal Methods of Ultraviolet Femtosecond Laser Processing of Aerospace AFRP Composite Materials[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2024.0096
    [6]GENG Z T,ZHAO J Q. Design and development of virtual simulation experiment software of composite piezoelectric materials[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(11):3377-3381 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0826.
    [7]YANG Z G,KE Z S,YANG X W,et al. Analysis of effect of construction process on electrical properties of composite skins[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(10):3013-3020 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0763.
    [8]XU M R,ZENG B Y,XIONG X,et al. Tensile fatigue properties of carbon fiber laminates in hygrothermal environments[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(7):1614-1622 (in Chinese). doi: 10.13700/j.bh.1001-5965.2021.0565.
    [9]XIAO Yao, LI Yong, LI Dong-sheng, WANG Lei, JIANG Chao. Influence analysis of curing stress and stress relaxation on profile accuracy of carbon fiber reinforced composites tools[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2023-0109
    [10]LI Xing, LI Zeng-shan, DENG Fan-chen, NIE Lei, ZHANG Tian. Sub-model Based Failure Analysis of Composite Hybrid Joint Structure[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2023.0555
    [11]DONG H M,LI X G,MA X Q,et al. Research progress in mechanically fastened polymer-matrix composite joints with protruding-head bolts[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(4):745-760 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0682.
    [12]WANG L Y,CHEN W H,JIANG Y S,et al. Measurement of ejection factor of new resin matrix composites[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(11):2960-2967 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0056.
    [13]CHEN S Z,LI D C,XIANG J W. Design optimization of tow-steered composite structure targeting on manufacturing cost[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(9):2423-2431 (in Chinese). doi: 10.13700/j.bh.1001-5965.2021.0677.
    [14]LI T S,WANG S K,WU Q,et al. Interface adjustment of aerospace-grade T800 carbon fiber composite material[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(8):2011-2020 (in Chinese). doi: 10.13700/j.bh.1001-5965.2021.0619.
    [15]YANG Hui, FAN Shuoshuo, WANG Yan, LIU Rongqiang, XIAO Hong. Stiffness optimization of M-shaped boom based on radial basis function surrogate model[J]. Journal of Beijing University of Aeronautics and Astronautics, 2022, 48(11): 2121-2129. doi: 10.13700/j.bh.1001-5965.2021.0091
    [16]WANG Rong, YU Yalin, WANG Lechen, MO Shenzhong, HUANG Yuqing, ZHOU Xiang. Effects of prepreg ambient-temperature storage life on mechanical properties of MT700/603 composites[J]. Journal of Beijing University of Aeronautics and Astronautics, 2022, 48(12): 2434-2441. doi: 10.13700/j.bh.1001-5965.2021.0121
    [17]CUI Jianguo, XU Lingyu, YU Mingyue, JIANG Liying, WANG Jinglin, LIN Zeli. Health state prediction technique for aircraft wing based on MEMD and ELM[J]. Journal of Beijing University of Aeronautics and Astronautics, 2017, 43(8): 1501-1508. doi: 10.13700/j.bh.1001-5965.2016.0610
    [18]Xu Menghui, Qiu Zhiping. Interval analysis and optimization for free vibration of all-composite lattice truss core sandwich beam[J]. Journal of Beijing University of Aeronautics and Astronautics, 2013, 39(8): 1079-1085.
    [19]Yuan Kaihua, Qiu Zhiping. Flutter control of composite panels with embedded piezoelectric materials[J]. Journal of Beijing University of Aeronautics and Astronautics, 2009, 35(12): 1429-1433.
    [20]Zeng Jia, Shen Gongzhang, Xia Jie, Yang Lingyu. Cooperative trajectory planning for UAV towards moving target aground[J]. Journal of Beijing University of Aeronautics and Astronautics, 2009, 35(7): 887-890.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views(2432) PDF downloads(592) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return