| Citation: | Zhong Meiying, Liu Zhixin. Production plan and control of manufacturing system based on simulation[J]. Journal of Beijing University of Aeronautics and Astronautics, 2012, (9): 1261-1266. (in Chinese)
|
| [1] |
郑力,江平宇,乔立红,等. 制造系统研究的挑战和前沿[J].机械工程学报,2010,46(21):124-136 Zheng Li,Jiang Pingyu,Qiao Lihong,et al.Challenges and frontiers of manufacturing systems[J].Journal of Mechanical Engineering,2010,46(21):124-136 (in Chinese)
|
| [2] |
Aleisa E E,Lin L.For effective facilities planning:layout optimisation then simulation, or vice versa//Kuhl M E,Steiger N M,Armstrong F B,et al.Proceedings of the 2005 Winter Simulation Conference.Florida:Society for Computer Simulation International,2005:1381-1385
|
| [3] |
刘飞．先进制造系统[M]．北京:中国科学技术出版社,2006:10-30 Liu Fei.Modern manufacturing system[M].Bejing:China Science & Technology Press,2006:10-30(in Chinese)
|
| [4] |
Chandra C,Grabis J.Role of flexibility in supply chain design and modeling:introduction to the special issue[J].Omega,2009(37): 743-745
|
| [5] |
芮剑锋,杨建军,石艳.基于TOC及启发式规则的生产计划与控制方法[J].航空制造技术,2012(7):76-80 Rui Jianfeng,Yang Jianjun,Shi Yan.Production planning and control method based on TOC and heuristic rules[J].Aeronautical Manufacturing Technology,2012(7):76-80(in Chinese)
|
| [6] |
丁胡送,何平,徐晓燕.柔性对分布式制造系统绩效的影响[J].系统工程理论与实践,2011,31(9):1776-1783 Ding Husong,He Ping,Xu Xiaoyan.Impact of flexibility on performance of decentralized manufacturing system[J].Systems Engineering-Theory & Practice,2011,31(9):1776-1783(in Chinese)
|
| [7] |
段建国,李爱平,谢楠,等.基于状态熵的制造系统结构复杂性建模与评价[J].机械工程学报,2012,48(5):92-100 Duan Jianguo,Li Aiping,Xie Nan,et al.Structural complexity modeling and evaluation of manufacturing systems based on state entropy[J].Journal of Mechanical Engineering,2012,48(5):92-100(in Chinese)
|
| [8] |
Kuzgunkaya O,Eimaraghy H A．Assessing the structural complexity of manufacturing systems configurations[J].International Journal of Flexible Manufacturing Systems,2006,18(2):145-171
|
| [9] |
杨建军,寇益.在线仿真系统在生产计划与调度中的应用[J].北京航空航天大学学报,2009,35(2):215-218 Yang Jianjun,Kou Yi.Application of online simulation in production planning and scheduling[J].Journal of Beijing University of Aeronautics and Astronautics,2009,35(2):215-218(in Chinese)
|
| [10] |
Zhang Zhifeng.Complexity of cellular manufacturing systems based on entropy models[J]．Journal of Mechanical Science and Technology,2010,24(11):2275-2280
|
Copyright © Journal of Beijing University of Aeronautics and Astronautics
Address: Editorial Department of Journal of Beijing University of Aeronautics and Astronautics, 37 Xueyuan Road, Haidian District, Beijing Post Code: 100191 Email: jbuaa@buaa.edu.cn
Supported by:
Beijing Renhe Information Technology Co., Ltd.
DownLoad: