Probabilistic analysis for turbine disc radial displacement

[1] Hennecke D K,Trappmann K.Turbine tip clearance control in gas turbine engines .NASA N83-29254,1983 [2] Lattime S,Steinetz B.Turbine engine clearance control systems:current practices and future directions .AIAA 2002-3790,2002 [3] 漆文凯,陈伟.某型航空发动机高压涡轮叶尖间隙数值分析[J].南京航空航天大学学报,2003,35(1):63-67 Qi Wenkai,Chen Wei.Tip clearance numerical analysis of an aero-engine HPT[J].Journal of Nanjing University of Aeronautics & Astronautics,2003,35(1):63-67 (in Chinese) [4] Pilidis P,Maccallum N R L.Models for predicting tip clearance changes in gas turbines .NASA N83-29258,1983 [5] NSSA Glenn Research Center.HPT clearance control .NASA/CR-2005-213970,2005 [6] 岂兴明,朴英,祝剑虹.某型航空发动机高压涡轮叶顶间隙三维数值分析[J]．航空动力学报,2008,3(5):904-908 Qi Xingming,Pu Ying,Zhu Jianhong.3-D numerical analysis of the tip clearance of an aero-engine high pressure turbine[J].Journal of Aerospace Power,2008,3(5):904-908 (in Chinese) [7] Eeom Y S,Yoo K S,Park J Y.Reliability-based topology optimization using a standard response surface method for three-dimensional structures [J].Structural and Multidisciplinary Optimization,2011,43(2):287-295 [8] 李昌,韩兴.基于响应面法齿轮啮合传动可靠性灵敏度分析[J].航空动力学报,2011,26(3):711-715 Li Chang,Han Xing.Analysis of reliability sensitivity for gear engagement based on response surface methods[J].Journal of Aerospace Power,2011,26(3):711-715 (in Chinese) [9] Kypuros J A,Melcher K J.A reduced model for prediction of thermal and rotational effects on turbine tip clearance .NASA/TM-2003-212226,2003 [10] Annette E N,Christoph W M,Stehan S.Modeling and validation of the thermal effects on gas turbine transients [J].Journal of Engineering for Gas Turbines and Power,2005,127(3):564-572 [11] Hakan E.Design sensitivity analysis of structures based upon the singular value decomposition [J].Computer Methods in Applied Mechanics and Engineering,2002,191(5):3459-3476