Citation: | Xiao Changling, Chen Yunxia, Xu Danet al. Title homogenizing residual stress of heterogeneous component based on vibration stress relief[J]. Journal of Beijing University of Aeronautics and Astronautics, 2013, 39(8): 1133-1136. (in Chinese) |
[1] 刘洁瑜,余志勇,汪立新,等.导弹惯性制导技术[M] .西安:西北工业大学出版社,2010:1-3 Liu Jieyu,Yu Zhiyong,Wang Lixin,et al.Missile inertial guidance technology[M].Xi-an:Northwestern Polytechnical University Press,2010:1-3(in Chinese) [2] Yang Y S,Lee S H.A study on the joining strength of laser spot welding for automotive applications[J].Journal of Materials Processing Technology,1999,94(2):151-156 [3] Nishimura T,Aoki S,Hiroi T,et al.Reduction method for residual stress of welded joint using random vibration[J].Nuclear Engineering and Design,2005,6(235):1441-1445 [4] 蒋刚,何闻.高频振动时效消除焊接残余应力的仿真及实验研究[D].杭州:浙江大学,2007 Jiang Gang,He Wen.Simulation and experimental research on welding residual stress relieving by high frequency vibratory stress relief technology[D].Hangzhou:Zhejiang University,2007(in Chinese) [5] 黄晓婧,王俊彪,张贤杰.铝合金时效蠕变与时效应力松弛关系研究[J].航空制造技术,2011(11):99-101 Huang Xiaojing,Wang Junbiao,Zhang Xianjie.Research on relationship between agling creep and stress relaxation of Al-alloy[J].Aeronautical Manufacturing Techonlogy,2011(11):99-101(in Chinese) [6] 高耀东.ANSYS机械工程应用精华50例[M].北京:电子工业出版社,2011:262-263 Gao Yaodong.50 Cases of mechanical engineering application essence based on ANSYS[M].Beijing:Publishing House of Electronics Industry,2011:262-263(in Chinese) [7] David A Tanner,Jeremy S Robinson,Richard L Cudd.Cold compression residual stress reduction in aluminium alloy 7010[J].Materials Science Forum,2000,5(347):235-240 [8] JB/T5926-91振动时效工艺参数选择及技术要求[S] JB/T5926-91 The process parameters and technical requirements of vibration stress relief[S](in Chinese) [9] Lin Kuang.Finite element predictions of residual stress relief in a two-dimensional cantilever beam[D].New York:ALFRED University,2002
|