Effects of jet injection angle in a flat transverse flow

[1] 王永华,李本威,蒋科艺.加装推力矢量喷管对飞机起飞性能影响研究[J].海军航空工程学院学报,2008,23(6):626-628 Wang Yonghua,Li Benwei,Jiang Keyi.Research on take off performance of an aircraft installing thrust-vectoring nozzles[J].Journal of Naval Aeronautical and Astronautically University,2008,23(6):626-628( in Chinese) [2] 曲东才.推力矢量控制技术发展及关键技术分析[J].航空科学技术,2002,1(03):30-33 Qu Dongcai.Development for thrust vector control technology and analysis critical technology[J].Aeronautical Science & Technology,2002,1(03):30-33( in Chinese) [3] Kowal H J．Advances in thrust vectoring and the application of flow-control technology[J].Canadian Aeronautics and Space Journal,2002,48(1):145-151 [4] 罗静,王强,额日其太.两种流体控制矢量喷管内流场计算及分析[J].北京航空航天大学学报,2004, 30(7):597-601 Luo Jing,Wang Qiang,Eriqitai.Computational analysis of two fluidic thrust-vectoring concepts on nozzle flow field[J].Journal of Beijing University of Aeronautics and Astronautics,2004, 30(7) :597-601( in Chinese) [5] 吴盟,额日其太.激波控制矢量喷管流动与工作特性研究[J].燃气涡轮试验与研究,2012,25(1):29-34 Wu Meng,Eriqitai.Research on structure and performance of shock wave control vector nozzle flow field[J].Gas Turbine Experiment and Research,2012,25(1):29-34(in Chinese) [6] Waithe K A,Deere K A.Experimental and computational investigation of multiple injection ports in a convergent-divergent nozzle for fluidic thrust vectoring[R].AIAA-2003-3802,2003 [7] Deere K A.Summary of fluidic thrust vectoring research conducted at nasa langley research center[R].AIAA-2003-3800,2003 [8] Beresh S J,Henfling J F,Erven R J,et al.Stereoscopic piv for crossplane vorticity measurement of a supersonic jet in subsonic compressible crossflow[R].AIAA-2004-2181,2004 [9] Deskman D A,Lu F K．Jet in supersonic crossflow on a flat plate[R].AIAA-2006-3451,2006 [10] Forliti1 D J,Echavarria D I.Thrust vector control using transverse injection and countercurrent shear[R].AIAA-2008-3879,2008 [11] Sadiq M.Performance analysis and flowfield characterization of secondary injection thrust vector control for 2DCD nozzle[D].Los Angeles:Master of Science(Astronautical Engineering),University of Southern California,2007 [12] 吴雄.固体发动机燃气二次喷射理论与试验研究[D].长沙:国防科技大学航天与材料工程学院,2007 Wu Xiong.Theoretical and experimental research on hot gas secondary injection for solid rocket motor[D].Chang Sha:College of Aerospare and Material Engineering,National University of Defense Technology,2007(in Chinese)