Yield surface of transversely isotropic foams under axisymmetric loadings

[1] Gibson L J,Ashby M F.Cellular solids:Structures & properties[M].Cambridge:Cambridge University Press,1997 [2] 卢子兴,郭宇.金属泡沫材料力学行为的研究概述[J].北京航空航天大学学报,2003,29(1):978-983 Lu Zixing,Guo Yu.Brief review of studies on the mechanical behavior of metallic foams[J].Journal of Beijing University of Aeronautics and Astronautics,2003,29(1):978-983 (in Chinese) [3] Deshpande V S,Fleck N A.Isotropic constitutive models for metallic foams[J].Journal of the Mechanics and Physics of Solids,2000,48(6):1253-1283 [4] Deshpande V S,Fleck N A.Multi-axial yield behaviour of polymer foams[J].Acta Materialia,2001,49(10):1859-1866 [5] Chen C,Lu T J.A phenomenological framework of constitutive modeling for incompressible and compressible elasto-plastic solids[J].International Journal of Solids and Structures,2000,37(52):7769-7786 [6] Tvergaard V.Influence of void nucleation on ductile shear fracture at a free surface [J].Journal of the Mechanics and Physics of Solids,1982,30(6):399-425 [7] Gioux G,Mccormack T M,Gibson L J.Failure of aluminum foams under multiaxial loads [J].International Journal of Mechanical Sciences,2000,42(6):1097-1117 [8] Tagarielli V L,Deshpande V S,Fleck N A,et al.A constitutive model for transversely isotropic foams,and its application to the indentation of balsa wood [J].International Journal of Mechanical Science,2005,47(4/5):666-686 [9] Alkhader M,Vura M.An energy-based anisotropic yield criterion for cellular solids and validation by biaxial FE simulations[J].Journal of the Mechanics and Physics of Solids,2009,57(5):871-890 [10] 袁本立,卢子兴.基于三类单胞模型的开、闭孔泡沫材料弹性性能的有限元分析[J].机械强度,2007,29(4):627-631 Yuan Benli,Lu Zixing.Finite element analysis of elastic properties of open-cell and closed-cell foam based on three kind of cell models[J].Journal of Mechanical Strength,2007,29(4):627-631(in Chinese)