Fault tree analysis of corrosion failure for aircraft structures and improvements

[1] 黄岭才,谷岸,刘慧丛,等.海洋环境下服役飞机铝合金零件腐蚀失效分析[J].北京航空航天大学学报,2008,34(10):1217-1221 Huang Lingcai,Gu An,Liu Huicong,et al.Corrosion failure of aluminum alloy parts on airplane used in marine environment[J].Journal of Beijing University of Aeronautics and Astronautic,2008,34(10):1217-1221 ( in Chinese) [2] Robinson M J.The role of wedging stresses in the exfoliation corrosion of high strength aluminium alloys[J].Corrosion Science,1983,23(8):887-899 [3] 韩德盛,李荻.LY12铝合金在海洋大气环境下加速腐蚀试验和外场暴露试验的相关性[J].腐蚀与防护,2008,29(1):119-120 Han Desheng,Li Di.Correlation study of accelerated corrosion testing and outfield testing of aluminum alloy[J].Corrosion and Protection,2008,29(1):119-120(in Chinese) [4] Contini S,Cojazzi G G M,Renda G.On the use of non-coherent fault trees in safety and security studies [J].Reliability Engineering and System Safety,2008,93:1886-1895 [5] Dan M Shalev,Joseph Tiran.Condition-based fault tree analysis[J].Reliability Engineering and System Safety,2007,92:1231-1241 [6] 曾声奎,赵廷弟,张建国,等.系统可靠性设计分析教程[M].北京:北京航空航天大学出版社,2001:136-138 Zeng Shengkui,Zhao Tingdi,Zhang Jianguo,et al.Design and analysis of system reliability[M].Beijing:Beijing University of Aeronautics and Astronautics Press,2001:136-138(in Chinese) [7] Dong Yuhua,Yu Datao.Estimation of failure probability of oil and gas transmission pipelines by fuzzy fault tree analysis[J].Journal of Loss Prevention in the Process Industries,2005,18:83-88 [8] Demichela M,Piccinini N,Ciarambino I.On the numerical solution of fault trees[J].Reliability Engineering and System Safety,2003,82:141-147 [9] Rajasekaran B,Raman S G S,Krishnab L R,et al.Influence of microarc oxidation and hard anodizing on plain fatigue and fretting fatigue behaviour of Al Mg Si alloy[J].Surface and Coatings Technology,2008,202(8):1462-1469