Rapid partitioning of an aircraft 3D model into its assembly cells

[1] 刘忠梁.飞机装配协调互换问题与装配型架设计安装[M].北京:航空工业出版社,1991:26-27 Liu Zhongliang. Aircraft assembly coordination & exchange problem and assembly fixture design & installation [M]. Beijing: Aviation Industry Press,1991:26-27(in Chinese) [2] 巴布什金А и.飞机结构装配方法[M].崔连信,译.北京:航空工业出版社,1990:57-138 Бабушкин А и. Aircraft structure assembly method[M]. Translated by Cui Lianxin. Beijing: Aviation Industry Press,1990:57-138(in Chinese) [3] 薛鹏,李原,彭培林.基于实例的飞机装配单元划分技术研究[J].中国机械工程, 2007, 18(9):2318-2321 Xue Peng, Li Yuan, Peng Peilin. Partitioning assembly cells for aircraft using case-based reasoning [J]. China Mechanical Engineering, 2007, 18(9): 2318-2321 (in Chinese)  [4] Boujault A.Contribution a une approche methodologique de I-assemblage automatise: Elaboration automatique des sequences operatoires . Besancon:Universite de Franche-Counte, 1984 [5] Hemem De Mello L S, Sanderson A C. Automatic generation of mechanical assembly sequences CMU-RI-TR-88-19,1988: 55-61 [6] 王艳玮,樊其瑾, 彭炎午.基于模糊聚类的产品合理子装配划分[J].机械科学与技术, 2001, 20(2): 299-302 Wang Yanwei, Fan Qijin,Peng Yanwu. Product subassembly partition method based on fuzzy clustering [J]. Mechanical Science and Technology, 2001, 20(2): 299-302 (in Chinese) [7] 姚任远,蔡青.飞机装配技术[M].北京:国防工业出版社, 1993: 19-24, 111-118 Yao Renyuan,Cai Qing. Technology on airplane assembly[M]. Beijing: National Defense Industry Press, 1993: 19-24, 111-118(in Chinese) [8] 《航空制造工程手册》总编委会.航空制造工程手册:飞机装配[M].北京:航空工业出版社,1993: 21-24, 30-40 Total Editorial Board of Aviation Manufacturing Engineering Manual. Aviation manufacturing engineering manual: aircraft assembly[M]. Beijing: Aviation Industry Press, 1993:21-24, 30-40(in Chinese)