Simulation of liquid slosh in turning process of tank truck

[1] Hauashi M, Hatanaka K, Lagrange K M. Finite element method for free surface navier-stokes flow using fractional step methods [J]. International Journal Numerical Methods Fluids, 1991, 13:805-840 [2] Armenio V. On the analysis of sloshing of water in rectangular containers: numerical study an experiment validation [J]. Ocean Engineering, 1996, 23(8):705-737 [3] Yue Baozeng, Wang Zhaolin, Li Junfeng. Liquid sloshing in cylindrical tank with elastic spacer [J]. Communications in Nonlinear Science & Numerical Simulations, 1996, 1(2):66-69 [4] 陈铭年,林永智,徐建全.椭圆矩形油罐车转弯横向稳定性的计算分析[J].专用汽车, 2003, 5:3-5 Chen Mingnian, Lin Yongzhi, Xu Jianquan. Calculate analysis of transversal stabilization for turning of oil tank truck with irregular elliptical section [J].Special Purpose Vehicle,2003,5:3-5(in Chinese) [5] 陈志伟. 移动式压力容器介质晃动数值模拟及防波装置研究 .浙江:浙江大学材料与化学工程学院, 2006 Chen Zhiwei, Numerical simulation of liquid sloshing in transportable pressure vessel and research on the baffles . Zhejiang: School of Material and Chemical Engineering, Zhejiang University, 2006(in Chinese) [6] 李松,高芳清,杨翊仁,等.液体晃动有限元模态分析及试验研究[J].核动力工程, 2007, 28(4): 54-57 Li Song, Gao Fangqing, Yang Yiren, et al. Finite element modal analysis and dynamic experimental for liquid sloshing[J].Nuclear Power Engineering, 2007, 28(4):54-57(in Chinese) [7] 刘奎,康宁.罐车制动时液体晃动的仿真分析[J].北京航空航天大学学报,2009,35(7):799-803 Liu Kui, Kang Ning. Simulation of liquid slosh in braking process of tank truck [J]. Journal of Beijing University of Aeronautics and Astronautics, 2009,35(7):799-803(in Chinese)