Transient heat transfer model of proton exchange membrane fuel cell stack with internal humidification

[1] 黄敏,李兴虎.质子交换膜燃料电池堆电气性能试验研究[J].电源技术,2007,31(5):361-363 Huang Min,Li Xinghu. Experimental research on the electric performance of proton exchange membrane fuel cell stack [J]. Chinese Journal of Power Sources,2007,31(5):361-363(in Chinese) [2] Lee J H,Lalk T R. Modeling fuel cell stack system [J]. Journal of Power Sources,1998,73:229-241 [3] Amphlett J C,Mann R F,Peppley B A,et al. A model predicting transient responses of proton exchange membrane fuel cells [J]. Journal of Power Sources,1996,61:183-188 [4] 邵庆龙,曹广益,朱新坚.质子交换膜燃料电池电堆动态热传输模型[J].上海交通大学学报,2004,38(8):1300-1303 Shao Qinglong,Cao Guangyi,Zhu Xinjian. Heat transport dynamic model of proton exchange membrane fuel cell stack [J]. Journal of Shanghaijiaotong University,2004,38(8):1300-1303(in Chinese) [5] Beining T,Lu D M,Djilali N. Three-dimensional computational analysis of transport phenomena in a PEM fuel cell [J]. Journal of Power Sources,2002,106:284-294 [6] Ceraolo M,Miulli C,Pozio A. Modelling static and dynamic behavior of proton exchange membrane fuel cells on the basis of electro-chemical description [J].Journal of Power Sources,2003,113:131-144 [7] Cheddie D,Munroe N. Mathematic model of a PEMFC using a PBI membrane[J]. Energy Conversion and Management,2006,47:1490-1504 [8] 黄敏,李兴虎.质子交换膜燃料电池的参数模型及实验验证[J].武汉理工大学学报,2008,30(6):110-113 Huang Min,Li Xinghu. Parametric modeling and experimental evaluation of a proton exchange membrane fuel cell stack [J]. Journal of Wuhan University of Technology,2008,30(6):110-113(in Chinese)