Yan Hui, Zhang Zhongpei. Design of data-aided symbol timing and carrier synchronization loop[J]. Journal of Beijing University of Aeronautics and Astronautics, 2012, (9): 1210-1213. (in Chinese)
Citation: Li Zhanguo, Zhao Yongsheng, Huang Xinet al. Design method of soil stabilizer produced with industrial waste[J]. Journal of Beijing University of Aeronautics and Astronautics, 2009, 35(4): 497-500. (in Chinese)

Design method of soil stabilizer produced with industrial waste

  • Received Date: 23 Apr 2008
  • Publish Date: 30 Apr 2009
  • Such problems were discussed as the influence of chemical factors in soil on hydrates growing in stabilized soil and the countermeasure to eliminate the influence, the system character of hydrates to form optimal stabilized soil structure, the concordance of growing process between cementitious hydrates and expansible hydrates and control method to the concordance. On this basis, according to the technical advantages of industrial wastes in prepare stabilizer the design thought and method for the soft soil stabilizer prepared with industrial wastes was proposed and an example was presented. Experimental results show that according to this design method, the 28d unconfined compressive strength of stabilized soil stabilized by the stabilizer prepared with industrial wastes is 1.5~2.75 times higher than that of stabilized soil by cement.

     

  • [1] Sreekrishnavilasam A, Rahardja S, Kmetz R, et al. Soil treatment using fresh and landfilled cement kiln dust[J]. Construction and Building Materials, 2007, 21:318-327 [2] Nalbantoglu Z. Effectiveness of class C fly ash as an expansive soil stabilizer[J]. Construction and Building Materials, 2004,18:377-381 [3] Kolias S, Kasselouri-Rigopoulou V, Karahalios A. Stabilisation of clayey soils with high calcium fly ash and cement[J]. Cement & Concrete Composites, 2005, 27:301-313 [4] 宁建国,黄新.利用工业废渣配制水泥系软土固化剂探讨[J].工业建筑,2005,35:432-438 Ning Jianguo, Huang Xin. Exploration of preparing cement-based stabilizing agent for soft soil by industrial cinders[J]. Industrial Construction, 2005,35:432-438 (in Chinese) [5] 黄新,许晟,宁建国.含铝固化剂固化软土的试验研究[J].岩石力学与工程学报,2007,26(1):156-161 Huang Xin, Xu Sheng, Ning Jianguo. Experimental research on stabilized soft soils by alumina bearing modifier[J]. Chinese Journal of Rock Mechanics and Engineering, 2007,26(1):156-161 (in Chinese) [6] 黄新,宁建国,许晟,等.固化土结构的形成模型[J].工业建筑,2006,36(7):1-6 Huang Xin, Ning Jianguo, Xu Sheng,et al. Structure formation model of stabilized soil[J]. Industrial Construction, 2006,36(7):1-6(in Chinese) [7] Huang Xin, Li Zhanguo, Zhao Yongsheng, et al. Principle of soil stabilizr preparation by utilizing of industrial wastes Som N. Proceedings of the 13th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering:Vol Ι. New Delhi:Allied Publishers Private Limited Printing Division, 2007:773-776 [8] 赵永生.利用工业废渣配制软土固化剂的原理与方法 .北京:北京航空航天大学土木工程系,2007 Zhao Yongsheng. The theory and method of preparing stabilizer for soft soil with industrial waste . Beijing: Civil Engineering Department, Beijing University of Aeronautics and Astronautics, 2007(in Chinese)
  • Relative Articles

    [1]HOU B J,WANG J,XING Y F,et al. Performance study on bonding strength of radome based on cohesive zone model[J]. Journal of Beijing University of Aeronautics and Astronautics,2025,51(6):1916-1925 (in Chinese). doi: 10.13700/j.bh.1001-5965.2023.0790.
    [2]HU Jianjun, DOU Ruochen, ZHANG Xin, YAO Jing, KONG Xiangdong. Heat Dissipation Characteristics and Lightweight Evaluation of Lattice Structure[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2023.0572
    [3]ZHAO M,JIA H,WU S Q,et al. Mechanical characteristics of flexible connection technology for Mars parachute[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(12):3815-3824 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0932.
    [4]FU T Y,YANG N,GU Y F,et al. Characterization of influence of fiber arrangement on CFRP induction heating curing process[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(1):198-207 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0259.
    [5]WANG Dequan, ZHAO Yuxuan, YUAN Xiangyue, WANG Qingchun, CHEN Zhongjia. Design and simulation of large composite material curing furnace based on flow field uniformity[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2024.0370
    [6]ZUO B X,ZHOU B,DAI M L. Measurement of three-dimensional temperature and soot volume fraction for RP-3 jet fuel flame[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(4):1273-1281 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0415.
    [7]XIAO L F,ZHOU L W,LI X D. Numerical simulation of deformed airfoil modal after blast shock wave[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(1):341-349 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0244.
    [8]ZHANG D B,WANG L X,LI C. Simulation analysis of reduction effect of symmetrical winding method for multi-polar fiber ring on Shupe error[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(7):1715-1721 (in Chinese). doi: 10.13700/j.bh.1001-5965.2021.0530.
    [9]ZHANG C,HUANG Y Z,WANG C J,et al. Simultaneous measurement of size and velocity of burning particles based on light field imaging[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(4):949-956 (in Chinese). doi: 10.13700/j.bh.1001-5965.2021.0334.
    [10]SHAO L,PENG Y,LU X,et al. Optimization method for inlet and outlet of irregular fuel tank inerting system[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(10):2628-2634 (in Chinese). doi: 10.13700/j.bh.1001-5965.2021.0768.
    [11]GAO T F,KONG L G,SU B,et al. Design and simulation of detector for outer heliosphere pickup ions[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(2):367-377 (in Chinese). doi: 10.13700/j.bh.1001-5965.2021.0243.
    [12]LI Wen, CAI Yongqing, CHEN Mengfan, LIU Peng. Optical path simulation and design of NO rapid detection optical cavity structure[J]. Journal of Beijing University of Aeronautics and Astronautics, 2022, 48(11): 2146-2152. doi: 10.13700/j.bh.1001-5965.2021.0105
    [13]WENG Huiyan, CAI Guobiao, ZHENG Hongru, LIU Lihui, ZHANG Baiyi, HE Bijiao. Numerical simulation of effect of background pressure on electric propulsion plume field[J]. Journal of Beijing University of Aeronautics and Astronautics, 2022, 48(10): 1854-1862. doi: 10.13700/j.bh.1001-5965.2021.0039
    [14]YANG Chao, JIANG Yu, WU Zhigang. Numerical simulation of skipping motion of three-dimensional structure based on boundary element method[J]. Journal of Beijing University of Aeronautics and Astronautics, 2022, 48(9): 1678-1691. doi: 10.13700/j.bh.1001-5965.2022.0141
    [15]MA Runmei, ZHAO Xiang, CHEN Xiaozhu, LI Shuangxi, YANG Haichao. End face deformation and friction and wear of high-speed dry friction mechanical seal[J]. Journal of Beijing University of Aeronautics and Astronautics, 2022, 48(7): 1174-1182. doi: 10.13700/j.bh.1001-5965.2021.0005
    [16]WANG Yanzhong, LI Fei, CHEN Yanyan, ZHANG Yaping, WU Zegang, WANG Cheng. TC4 shot peening simulation and experiment[J]. Journal of Beijing University of Aeronautics and Astronautics, 2019, 45(9): 1723-1731. doi: 10.13700/j.bh.1001-5965.2018.0749
    [17]YANG Juntan, QIU Zhiping, LYU Zheng, LI Qi. Heat conduction analysis for simplified model of large scale space deployable structure[J]. Journal of Beijing University of Aeronautics and Astronautics, 2016, 42(3): 625-631. doi: 10.13700/j.bh.1001-5965.2015.0222
    [18]Jiao Jian, Wang Zili. Operational availability demonstration of military airplane based on simulation[J]. Journal of Beijing University of Aeronautics and Astronautics, 2006, 32(01): 112-116.
    [19]Song Zhidong, Li Yunhua. Demand-oriented quality evaluation of common ammunitions[J]. Journal of Beijing University of Aeronautics and Astronautics, 2005, 31(05): 485-488.
    [20]Liu Wei, Yuan Xiugan, Ge Heng, Han Y. Experiment study of pilots' situation cognitive level[J]. Journal of Beijing University of Aeronautics and Astronautics, 2004, 30(06): 543-546.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views(3489) PDF downloads(853) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return