Design of coordinated control system for beam-carried cranes group based on RTK-GPS

[1] Miyata N, Ota J, Arai T, et al. Cooperative transport by multiple mobile robots in unknown static environments associated with real-time task assignment[J].Transactions on Robotics and Automation, 2002,18(5):769-780 [2] Nishi T, Ando M, Konishi M. Distributed route planning for multiple mobile robots using an augmented lagrangian decomposition and coordination technique[J].Transactions on Robotics, 2005,21(6):1191-1200 [3] Li Yunhua, Yang Liman, Yang Guilin. Network-based coordinated motion control of large-scale transportation vehicles[J]. Transactions on Mechatronics, 2007,12(2):208-215 [4] Nakamura M, Hiyamizu D, Kyur a N. A method for precise contour control of mechatronic servo system with master-slave axes by use of synchronous position control[J]. Transactions of the Society of Instrument and Control Engineers, 1997, 33(4):247-253 [5] 逄波,王占林,白国长.工程机械液压底盘试验台双马达同步的研究[J].系统仿真学报, 2007, 19(9):2018-2021 Pang Bo, Wang Zhanlin, Bai Guochang. Study of dual motors synchronism drive based on engineering machine hydraulics underpan test-bed[J]. Journal of System Simulation, 2007, 19(9):2018-2021(in Chinese) [6] Wu Chihuang, Chou Huangju, Su Weihan. A genetic approach for coordinate transformation test of gps positioning[J]. IEEE Geoscience and Remote Sensing Letters, 2007,4(2):297-301 [7] Brown A K. GPS/INS uses low-cost MEMS IMU[J].Aerospace and Electronic Systems Magazine, 2005,20(9):3-10 [8] Sharaf R, Noureldin A, Osman A, et al. Online INS/GPS integration with a radial basis function neural network[J].Aerospace and Electronic Systems Magazine, 2005,20(3):8-14