Numerical simulation of laser bending process

[1] Namba Y. Laser forming in space Int Conf On Lasers’85.New York: Springer-Verlag,1986: 403-407 [2] Geiger M, Vollertsen F. Flexible straightening of car body shells by laser forming SAE Special Publications. Warrendale,PA: SAE,1993(944):37-44 [3] 管延锦,赵国群,孙胜,等.扫描次数对板料激光弯曲成形影响的有限元仿真研究[J].航空制造技术,2004(1):55-57,96 Guan Yanjin,Zhao Guoqun,Sun Sheng,et al. Study on influence of the number of scans on laser bending of sheet metals by FEM simulation[J]. Aeronautical Manufacturing Technology,2004(1):55-57,96(in Chinese) [4] Cheng P J, Lin S C. An analytical model for the temperature field in the laser forming of sheet metal[J]. Journal of Material Processing Technology, 2000,101(1):261-267 [5] 陈彦宾, 李俐群, 林尚扬. 激光弯曲成形温度场的有限元数值模拟[J]. 应用激光,2002,22(2):145-149 Chen Yanbin, Li Liqun, Lin Shangyang. Finite element simulation of temperature field of laser bending[J]. Laser Application,2004,22(2):145-149(in Chinese) [6] Kyrsanidi An K, Kermanidis Th B, Pantelakis Sp G. An analytical model for the prediction of distortions caused by the laser forming process[J].Journal of Materials Processing Technology,2000,104(1):94-102 [7] Geiger M, Merklein M, Pitz M. Laser and forming technology an idea and the way of implementation[J].Journal of Materials Processing Technology,2004,151(1/2/3):3-11 [8] Liu F R, Chan K C,Tang C Y. Theoretical analysis of deformation behavior of aluminum matrix composites in laser forming[J]. Materials Science and Engineering, 2005,396(1/2):172-180 [9] Wang X F, Chen G N, Hu Sh G, et al. Research on dynamic micro-deformation under laser point source[J]. Machine Tools & Manufacture,2005,45(12/13):1515-1522 [10] 程丽芳.铝合金板激光弯曲成形的实验研究 .大连:大连理工大学机械工程学院,2005 Chen Lifang. Experimental research on laser bending and forming of aluminum .Dalian: School of Mechanical & Engineering,Dalian University of Technology,2005(in Chinese) [11] Geiger M. Synergy of laser material processing and metal forming[J]. CIRP Annals-Manufacturing Technology, 1994,43(2):563-570 [12] Vollertsen F. Mechanisms and models for laser forming Laser Assisted Net Shape Engineering 1. Bamberg: Meisenbach GmbH, 1994,1:345-359 [13] 裴继斌,张立文,张全忠,等. 船舶钢板激光弯曲成形的实验研究[J].锻压技术,2005,5:64-66 Pei Jibin, Zhang Liwen, Zhang Quanzhong, et al. Experimental study on laser bending of shipbuilding sheet plate[J]. Forging & Stamping Technology,2005,5:64-66(in Chinese) [14] 管延锦,张建华,孙胜,等.扫描路径规划对激光弯曲成形影响的实验研究[J].锻压技术,2005,1:36-39 Guan Yanjin, Zhang Jianhua, Sun Sheng, et al. Experimental study on the influence of planning parameters of scanning paths on laser bending of sheet metals[J]. Forging & Stamping Technology,2005,1:36-39(in Chinese) [15] Wang X F, Takacs Janos, Krallics Gyorgy, et al. Research on the themo-physical process of laser bending [J]. Journal of Materials Processing Technology, 2002, 127:388-391 [16] 王秀凤,吕晓东,胡世光,等.薄板激光弯曲温度场的数值模拟与校验[J].北京航空航天大学学报,2003,29(5):377-381 Wang Xiufeng, Lü Xiaodong, Hu Shiguang, et al. Research on numerical simulation and verify of laser bending for sheet metal [J]. Journal of Beijing University of Aeronautics and Astronautics, 2003,29(5):377-381(in Chinese)