New technique of contour adjustment for high precision reflector panels

[1] 李东升,周贤宾,常和生,等.高精度反射器面板精密成形若干关键技术研究[J].中国机械工程, 2003,13(14): 1133-1135 Li Dongsheng,Zhou Xianbin,Chang Hesheng, et al. Several key technologies of precise forming for reflector panels[J].China Mechanical Engineering,2003,13(14):1133-1135(in Chinese) [2] 王兆峻,陈五一.紧缩场反射面板热变形的适应性调整[J].北京航空航天大学学报,2005,31(1):86-88 Wang Zhaojun, Chen Wuyi. Adaptive regulation on the thermal deformation of the panel of compact antenna test range[J].Journal of Beijing University of Aeronautics and Astronautics,2005,31(1):86-88(in Chinese) [3] Chang H, Tsung T T, Chen L C, et al. The manufacture of microwave plate reflector antennas by employing the improved superplasticity hydraulic forming method[J]. Journal of Materials Processing Technology,2005,160(2):107-111 [4] Steve Barker, Christophe Granet R F. The development of an inexpensive high-precision mm-wave compact antenna test range Proceedings of AMTA. New York: Curran Associates, 2005: 326-329 [5] Szwabowski D. A new approach to fabricating cost-effective millimeter wave antennas Proc of SPIE.Bellingham: International Society for Optical Engineering, 2004,5489:1094-1114 [6] Gary A, Iremblay E A D.Design and manufacture of an ultra-light weight, solid deployable reflector[J]. Analysis of Optical Structures, 1991,1532:114-123 [7] Valsecchi G, Eder J,Grisoni G,et al. High precision electroformed nickel panel technology for sub-millimeter radio telescope antennas Antennas and Propagation Society International Symposium. Los Angeles:IEEE,2003,1:124-127 [8] Valsecchi G, Franchini C,Prieto R G,et al. Nickel sandwich technology for high precision reflector antennas[J]. IEEE Antennas Propag Soc AP S Int Symp,1999,3: 2170-2173 [9] 周贤宾,陈连峰,李东升.反射器夹层面板精密成形原理[J].北京航空航天大学学报,2004, 30(4): 296-300 Zhou Xianbin,Chen Lianfeng,Li Dongsheng. Principle of precision forming for sandwich panel of large antenna reflector[J].Journal of Beijing University of Aeronautics and Astronautics,2004,30(4):296-300(in Chinese) [10] 陈连峰,李东升,周贤宾,等. 高精度反射器面板精密复合成形数值模拟[J]. 中国机械工程,2004,15(3):248-251 Chen Lianfeng,Li Dongsheng,Zhou Xianbin, et al. Numerical simulation for flexible compound forming of high precision sandwich panels[J].China Mechanical Engineering,2004,15(3):248-251(in Chinese)