Experiment of sheet metal on laser bending

[1] 程丽芳.铝合金板激光弯曲成形的实验研究 .大连:大连理工大学机械工程学院,2005 Cheng Lifang. Experimental research on laser bending and forming of aluminum .Dalian: School of Mechanical & Engineering, Dalian University of Technology,2005(in Chinese) [2] Geiger M. Synergy of laser material processing and metal forming [J]. Annals of CIRP, 1994, 43(2):563-570 [3] Vollertsen F. Mechanisms and models for laser forming Laser Assisted Net Shape Engineering 1. Bamberg: Meisenbach GmbH, 1994,1:345-359 [4] 周益军,张永康,孔德军,等.基于水冷却的不锈钢板料激光热应力成形试验[J].农业机械学报,2007, 38(4):172-176 Zhou Yijun, Zhang Yongkang, Kong Dejun, et al. Study on laser forming of AISI304-sheet metal by thermal stress based on water-cooling[J]. Transactions of the Chinese Society of Agricultural Machinery, 2007,38(4): 172-176(in Chinese) [5] 裴继斌,张立文,张全忠,等.船舶钢板激光弯曲成形的试验研究[J].锻压技术, 2005,5:64-66 Pei Jibin, Zhang Liwen, Zhang Quanzhong, et al. Experimental study on laser bending of shipbuilding sheet plate[J]. Forging & Stamping Technology,2005,5:64-66(in Chinese) [6] 管延锦,张建华,孙胜,等.扫描路径规划对激光弯曲成形影响的实验研究[J].锻压技术,2005,1:36-39 Guan Yanjin, Zhang Jianhua, Sun Sheng, et al. Experimental study on the influence of planning parameters of scanning paths on laser bending of sheet metals[J]. Forging & Stamping Technology, 2005,1:36-39(in Chinese) [7] Wang X F, Takacs Janos, Krallics Gyorgy, et al. Research on the themo-physical process of laser bending [J]. Journal of Materials Processing Technology, 2002, 127:388-391 [8] 王秀凤,吕晓东,胡世光,等.薄板激光弯曲温度场的数值模拟与校验[J].北京航空航天大学学报,2003, 29(5):377-381 Wang Xiufeng, Lü Xiaodong, Hu Shiguang, et al. Research on numerical simulation and verify of laser bending for sheet metal [J]. Journal of Beijing University of Aeronautics and Astronautics, 2003, 29(5):377-381(in Chinese)