Numerical simulations of flame tube cooling structure with multi-jet holes

[1] 陈焱.致密微孔壁复合冷却数值模拟和实验研究 .南京:南京航空航天大学能源与动力工程学院,2005 Chen Yan. Numerical and experimental study of effusion cooling of a plate with compact tiny holes . Nanjing: College of Energy & Power Engineering, Nanjing University of Aeronautics and Astronautics, 2005 (in Chinese) [2] Hyams D G,Leylek J H. A detailed analysis of film cooling physics: part III-streamwise injection with shaped holes [J]. ASME, Journal of Turbomachinery, 2000, 122: 122-132 [3] Brittingham R A,Leylek J H. A detailed analysis of film cooling physics: part IV- compound-angle injection with shaped holes [J]. ASME, Journal of Turbomachinery, 2000, 122: 133-145 [4] 刘江涛,吴海玲,陶涛,等.斜孔气膜冷却数值模拟分析[J].工程热物理学报,2004,25(6): 1034-1036 Liu Jiangtao, Wu Hailing, Tao Tao, et al. Numerical simulation of film cooling [J]. Journal of Engineering Thermophysics, 2004,25(6): 1034-1036 (in Chinese) [5] Gritsch M, Schulz A, Wittig S. Film-cooling holes with expanded exits: near-hole heat transfer coefficients [J]. International Journal of Heat and Fluid Flow, 2000, 21(2):146-155 [6] 曹玉璋,陶智,徐国强,等.航空发动机传热学[M]. 北京:北京航空航天大学出版社,2005 Cao Yuzhang, Tao Zhi, Xu Guoqiang, et al. Heat transfer of aero-engine [M]. Beijing: The Press of Beijing University of Aeronautics and Astronautics, 2005 (in Chinese) [7] 葛绍岩,刘登瀛,徐靖中,等.气膜冷却[M]．北京:科学出版社,1985 Ge Shaoyan, Liu Dengying, Xu Jingzhong, et al. Film cooling [M]. Beijing: Science Press, 1985 (in Chinese) [8] 李彬,胡正义,林宇震,等.多斜孔壁整体冷却效率实验研究[J]. 航空动力学报,1999,14(2):157-160 Li Bin, Hu Zhengyi, Lin Yuzhen, et al. An experimental study on overall cooling effectiveness of inclined multihole plates [J]. Journal of Aerospace Power, 1999, 14(2):157-160(in Chinese)