Corrosion failure of aluminum alloy parts on airplane used in marine environment

[1] 赖春晓. 水引起保护涂膜剥离的机理及防止方法[J]. 腐蚀科学与防护技术,1992,4(2):127-134 Lai Chunxiao. Mechanism of delamination of protective film initiated by water and prevention measure[J]. Corros Sci Prote Technol,1992,4(2):127-134(in Chinese) [2] Rhodes D, Radon J C. Fracture analysis of exfoliation in an aluminium alloy[J]. Engineering Fracture Mechanics, 1978, 10(4):843-853 [3] Robinson M J. The role of wedging stresses in the exfoliation corrosion of high strength aluminium alloys[J]. Corrosion Science, 1983, 23(8):887-899 [4] 谢伟杰,李荻,胡艳玲,等.高强铝合金腐蚀等级的近似量化[J].北京航空航天大学学报, 1999, 25(5):502-504 Xie Weijie, Li Di, Hu Yanling, et al. Half-quantification of high strength aluminum alloy’s corrosion rank[J]. Journal of Beijing University of Aeronautics and Astronautic,1999,25(5):502-504(in Chinese) [5] Ketchem S J, Jankowsky E J. Hhipboard exposure test of aluminum alloys . AFWAL-TR-81-4019,1980 [6] 鲁效梅.铝合金挤压型材剥层腐蚀的研究[J].西飞科技, 1995(2): 12－16 Lu Xiaomei. Research of exfoliation in aluminum alloys[J]. Xifei Science and Technology, 1995(2): 12－16(in Chinese) [7] Posada M, Murr L E, Niou C S, et al. Exfoliation and related microstructures in 2024 aluminum body skins on aging aircraft[J]. Materials Characterization, 1997, 38(4/5):259-272 [8] 李荻,左尚志,郭宝兰. LY12 铝合金剥蚀行为的研究[J].中国腐蚀与防护学报,1995,15(3): 203－208 Li Di, Zuo Shangzhi, Guo Baolan. Research of exfoliation in LY12 aluminum alloys[J]. Journal of Chinese Society for Corrosion and Protection, 1995,15(3): 203－208 (in Chinese) [9] 陈群志,崔常京,孙祚东,等.LY12CZ 铝合金腐蚀损伤的概率分布及其变化规律[J]. 装备环境工程,2005,2(3):1-6 Chen Qunzhi, Cui Changjing, Sun Zuodong, et al. Probability distribution and variations of corrosion damage of LY12CZ aluminum alloys[J]. Equipment Environmental Engineering, 2005, 2(3):1-6(in Chinese) [10] 穆志韬,熊玉平. 高强度铝合金的腐蚀损伤分布规律研究[J].机械工程材料,2002, 26(4): 14-16 Mu Zhitao, Xiong Yuping. Distribution of corrosion damage of high strength aluminum alloys[J]. Materials for Mechanical Engineerin, 2002, 26(4):14-16(in Chinese) [11] 张正,宋诗哲,墨淑芬.0.1 mol/L NaCl溶液中不同剥蚀程度LY12CZ合金的EIS特征[J]. 金属学报, 2004, 40(7):754－758 Zhang Zheng, Song Shizhe, Mo Shufen. EIS characteristic of LY12CZ alloy with different exfoliation corrosion grades[J]. Acta Metallurgica Sinica,2004,40(7):754－758(in Chinese) [12] 胡艳玲,李荻,郭宝兰. 用时域法EIS技术研究LY12CZ铝合金的局部腐蚀[J].北京航空航天大学学报, 2001, 27(1):5-8 Hu Yanling, Li Di, Guo Baolan. Study on evaluation of localized corrosion of 2024T3 aluminum alloy with EIS[J]. Journal of Beijing University of Aeronautics and Astronautics, 2001, 27(1):5-8(in Chinese) [13] Conde A, Damborenea J. Electrochemical modeling of exfoliation corrosion behavior of 8090 alloy[J]. Electrochimica Acta,1998, 43(8):849-860 [14] Ketcham S J. Accelerated laboratory corrosion test for materials and finishes used in naval aircraft . ADA048059, 1977 [15] Reboul M C, Dubost B, Lashermes M. The stress corrosion susceptibility of aluminium alloy 7020 welded sheets[J]. Corrosion Science, 1985, 25(11):999-1018