Calibration-compensation method for micro inertial measurement unit based on MEMS

[1] 陈北鸥,孙文胜,张桂宏,等. 捷联组合(设备无定向)六位置测试标定[J]. 导弹与航天运载技术, 2001, (3):23-27 Chen Beiou, Sun Wensheng, Zhang Guihong, et al. Strapdown unit(without orientation) six-position test calibration[J]. Missiles and Space Vehicles, 2001, (3):23-27(in Chinese) [2] 任大海,顾启泰,毛刚,等. 微型惯性测量组合标定技术[J]. 清华大学学报, 2001, 41(8):21-24 Ren Dahai, Gu Qitai, Mao Gang, et al. Calibration techniques for micro inertial measurement units[J]. Journal of Tsinghua University, 2001, 41(8):21-24(in Chinese) [3] Kim A, Golnaraghif M F. Initial calibration of an inertial measurement unit using an optical position tracking system Position Location and Navigation Symposium. Canada:, 2004:96-101 [4] 王立文,国琳娜. 惯性测量装置标定技术研究[J]. 鱼雷技术, 2003, 11(1):17-22 Wang Liwen, Guo Linna. Calibration technique study of inertial measurement unit[J]. Torpedo Technology, 2003, 11(1):17-22(in Chinese) [5] Seong Yun Cho. Calibration of a redundant IMU . AIAA-2004-5123, 2004 [6] Nebot E, Whyte H D. Initial calibration and alignment of low-cost inertial navigation units for land vehicle applications[J]. Robotic Systems, 1999, 16(2):81-92 [7] Nassar S. Improving the inertial navigation system(INS) error model for INS and INS/DGPS applications . UCGE Reports No.20183, 2003 [8] Park Minha. Error analysis and stochastic modeling of MEMS based inertial sensors for land vehicle navigation applications . ALBERTA:Department of Geomatics Engineering, Caligary, 2004 [9] Hou Haiying. Modeling inertial sensors errors using allan variance . ALBERTA:Department of Geomatics Engineering, Caligary, 2004 [10] E-ISBN:0-7381-1430-8, 1999, IEEE Standard Specification Format Guide and Test Procedure for Linear, Single-Axis, Nongyroscopic Accelerometers [S]