Key techniques in simulation of machining distortion for aeronautical monolithic component

[1] Brinmsmeier E,Hannover J,Cammett T,et al. Residual stress-measurement and cause in machining process[J].Annals of the CIRP,1982,31(2):491-509 [2] Heiz A,Haszler A,Keidel C,et al. Recent development in aluminum alloy for aerospace application[J].Mater Sci Eng A,1999,A280:102-107 [3] 王兆峻.基于残余应力释放与重分布的薄壁零件加工变形研究 .北京:北京航空航天大学机械工程及自动化学院,2005 Wang Zhaojun. Research on machining distortion based on the relief and redistribution of residual stresses . Beijing:School of Mechanical Engineering and Automation,Beijing University of Aeronautics and Astronautics,2005(in Chinese) [4] 赵丽丽.航空铝合金预拉伸板残余应力及加工变形研究 .北京:北京航空航天大学机械工程及自动化学院,2006 Zhao Lili. Research on residual stresses & machining of machining deformation of aeronautic aluminum alloy pre-stretching board . Beijing:School of Mechanical Engineering and Automation,Beijing University of Aeronautics and Astronautics,2006(in Chinese) [5] 董兆伟.铝合金整体结构件铣削加工残余应力及变形研究 .北京:北京航空航天大学机械工程及自动化学院,2006 Dong Zhaowei.Study on the milling residual stress and deformation of the aluminum alloy integrated framework .Beijing:School of Mechanical Engineering and Automation,Beijing University of Aeronautics and Astronautics,2006(in Chinese) [6] 王立涛.关于航空框类结构件铣削加工残余应力和变形机理的研究 . 杭州:浙江大学机械与能源工程学院,2003 Wang Litao. Study on residual stresses and distortion theory of aeronautica frame structure in the milling . Hangzhou:College of Mechanical and Energy Engineering, Zhejiang University, 2003(in Chinese) [7] 黄志刚.航空结构件铣削加工变形的有限元模拟理论及方法研究 .杭州:浙江大学机械与能源工程学院,2003 Huang Zhigang.Study on finite element simulation of distortion due to milling process for aerospace molithic components . Hangzhou:College of Mechanical and Energy Engineering, Zhejiang University, 2003(in Chinese) [8] 王秋成,柯映林,章巧芳.7075铝合金板材残余应力深度梯度的评估[J].航空学报,2003,24(4):336-338 Wang Qiucheng,Ke Yinglin,Zhang Qiaofang.Evaluation of residual stress depth profiling in 7075 aluminum alloy plates[J].Acta Aeronautica et Astronautica Sinica,2003,24(4):336-338(in Chinese) [9] Alves de Sousa R J, Yoon J W, Cardoso R P R, et al.On the use of a reduced enhanced solid-shell(RESS) element for sheet forming simulations[J]. International Journal of Plasticity,2007(23):490-515 [10] Parente M P L, Fontes Valente R A,Natal Jorge R M, et al. Sheet metal forming simulation using EAS solid-shell finite elements[J]. Finite Elements in Analysis and Design,2006,42:1137-1149 [11] 王勖成.有限单元法[M].北京:清华大学出版社,2003 Wang Xucheng. Finite element method[M]. Beijing:Tsinghua University Press,2003(in Chinese) [12] 张毅.单面约束系统动力学研究进展[J].力学与实践,2000,22(6):8-11 Zhang Yi. Advances in dynamics of systems with unilateral constraints[J].