Friction modeling and compensation of positioning stage driven by linear motors

[1] 袭著燕,张涛,路长厚.数控伺服进给系统中摩擦补偿控制研究进展[J].现代制造工程,2006,1:21-26 Xi Zhuyan,Zhang Tao,Lu Changhou. Overview of friction compensation control in table servo feed systems of CNC tools[J].Modern Manufacturing Engineering, 2006,1:21-26(in Chinese) [2] 李泉. X-Y工作台的摩擦建模与仿真研究 .山东:山东大学机械工程学院,2005 Li Quan. Simulation study on X-Y table friction modeling .Shandong:School of Mechanical Engineering,Shandong University,2005(in Chinese) [3] 王中华,王兴松,王群,等．新型摩擦模型的参数辨识及补偿实验研究[J].制造业自动化,2001,6:30-33 Wang Zhonghua, Wang Xingsong, Wang Qun, et al. The experimental study of parameter identification of a new friction model and compensation based on it[J]. Manufacture Automation, 2001,6:30-33(in Chinese) [4] 王英,熊振华,丁汉．基于状态观测的自适应摩擦力补偿的高精度控制[J].自然科学进展,2005,9:1100-1105 Wang Ying, Xiong Zhenhua, Ding Han. High precision control of friction adaptive compensation based on status observer[J].The Natural Science Make Progress, 2005,9:1100-1105(in Chinese) [5] Majd Vahid Johari, Simaa Marwan A．A continuous friction model for servo systems with stiction[J].IEEE Transactions on Automatic Control, 1995:296-300 [6] 张友旺,桂卫华．基于自适应模糊神经网络的摩擦力分部补偿算法[J].控制与决策,2005(3):356-360 Zhang Youwang, Gui Weihua. Partition compensation for friction based on adaptive fuzzy neural network[J]. Control and Decision, 2005,3:356-360(in Chinese) [7] Armstrong-Helouvry Brian. Stick slip and control in low-speed motion[J].IEEE Transactions on Automatic Control, 1993,38(10):1483-1496 [8] Cong Shuang. Two adaptive friction compensations for DC servomotors Journal of Engineering and Applied Science. Piscataway, NJ:IEEE,1996:113-117