Citation: | Li Yi, Guo Hong, Yu Yongqianget al. Sliding mode control of permanent magnet synchronous motor with great inertia load[J]. Journal of Beijing University of Aeronautics and Astronautics, 2007, 33(10): 1208-1211. (in Chinese) |
[1] Akpolat Z H, Asher G, Clare J.A practical approach to the design of robust speed controllers for machine drives[J].IEEE Transactions on Industrial Electronics,2000, 47(2):315-324 [2] 黄丽莲,王茂.测试转台变负载轴系的自适应控制[J].中国惯性技术学报,2002,10(5):70-72 Huang Lilian,Wang Mao.An adaptive control method for test table’s axes with time-variant load moment of inertia[J].Journal of Chinese Inertial Technology,2002,10(5):70-72(in Chinese) [3] 彭天好,徐兵,杨华勇.大惯量变转速泵控马达调速系统模糊控制[J].机床与液压,2004(10):77-78 Peng Tianhao,Xu Bing,Yang Huayong.Fuzzy control of great inertia variable rotational speed pump-control-motor speed governing system[J].Machine Tool & Hydraulics,2004(10):77-78(in Chinese) [4] 吴志宏,毛明平,陶生桂.带变惯量负载的感应电机模糊控制策略研究[J].电气传动,2004(2):8-11 Wu Zhihong,Mao Mingping,Tao Shenggui.Research of fuzzy control strategy for induction motor with variable inertia load[J].Electric Drive,2004(2):8-11(in Chinese) [5] 唐任远.现代永磁电机——理论与设计[M].北京:机械工业出版社,1997:244-248 Tang Renyuan.Modern permanent magnet machines—theory and design[M].Beijing:China Machine Press,1997:244-248(in Chinese) [6] 刘金琨.滑模变结构控制Matlab仿真[M].北京:清华大学出版社,2005:4-8 Liu Jinkun.Matlab simulation for sliding mode control[M].Beijing:Tsinghua University Press,2005:4-8(in Chinese) [7] Young K D,Utkin V I,Ozguner U.A control engineer’s guide to sliding mode control[J].IEEE Transactions on Control Systems Technology,1999,7(3):328-342 [8] 高为炳.变结构控制的理论及设计方法[M].北京:科学出版社,1996 Gao Weibing.Theory and design of variable structure control[M].Beijing:Science Press,1996(in Chinese)
|