Stator setting angles adjustment on performance improvement of axial-centrifugal compressor

[1] Steinke Ronald J. Design of 9.271-pressure-ratio 5-stage core compressor and overall performance for first 3 stages .NASA-TP-2597,1986 [2] 王永明. 多级轴流压气机静叶转角优化计算[J]. 航空动力学报, 1992,7(1):77-80 Wang Yongming. Stator angle reset optimization computation of multi-stage axial-flow compressor[J]. Journal of Aerospace Power,1992,7(1):77-80(in Chinese) [3] 张健,任铭林. 静叶角度调节对压气机性能影响的试验研究[J]. 航空动力学报,2000,15(1):27-30 Zhang Jian, Ren Minglin. Experimental investigation on effect of stator vane angle adjustment on compressor performance[J]. Journal of Aerospace Power,2000,15(1):27-30(in Chinese) [4] 范非达. 转角优化程序在低压比轴流压气机上的应用[J]. 燃气涡轮试验与研究,1998,11(4):6-14 Fan Feida. Application of angle reset optimization program on low pressure-ratio axial-flow compressor[J].Gas Turbine Experiment and Research,1998,11(4):6-14(in Chinese) [5] 宋文艳,李新,范非达. 多级压气机可调静叶转角的多目标优化研究[J]. 推进技术,1997,18(4):26-30 Song Wenyan, Li Xin, Fan Feida. Investigation on multi-objective optimizing angle of variables stator of axial-flow compressor[J]. Journal of Propulsion Technology,1997,18(4):26-30(in Chinese) [6] 刘前智. 多级轴流压气机非设计性能的数值预估[J]. 航空动力学报,2004,19(1):108-112 Liu Qianzhi. Numerical prediction of multi-stage axial flow compressor off-design performances[J]. Journal of Aerospace Power,2004,19(1):108-112(in Chinese) [7] Denton, J D. The calculation of three-dimensional viscous flow through multistage turbomachines[J].ASME Journal of Turbomachinery,1992,114:18-26 [8] Adamczyk J J. Aerodynamic analysis of multistage turbomachinery flows in support of aerodynamic design . NASA-19990116700,1999 [9] 李晓娟, 桂幸民. 风扇/增压级设计与非设计性能数值模拟[J]. 推进技术, 2005, 26(6):522-525 Li Xiaojuan, Gui Xingmin. Numerical simulation of fan/compressor design and off-design performance[J]. Journal of Propulsion Technology,2005,26(6):522-525(in Chinese) [10] 姚吉先.轴流式压气机气动设计方法研究 .西安:西北工业大学航空动力与热能工程系,1992 Yao Jixian. Research of aerodynamic design methods on axial-flow compressor .Xi’an:Dept of Aeroengine and Thermal Power Engineering, Northwestern Polytechnical University, 1992(in Chinese)