Citation: | Li Jianli, Fang Jiancheng, Sheng Weiet al. Error analysis and integrated compensation of scale factor for MEMS gyroscope[J]. Journal of Beijing University of Aeronautics and Astronautics, 2007, 33(09): 1064-1067. (in Chinese) |
[1] 高钟毓. 国外微机械惯性仪表的进展[J].中国惯性技术学报,1996,4(1):6-10 Gao Zhongyu. Advance of micromechanical inertial instruments abroad[J].Journal of Chinese Inertial Technology, 1996,4(1):6-10 (in Chinese) [2] Kourepenis A, Borenstein J, Connelly J, et al. Performance of MEMS inertial sensors . IEEE 0-7803-4330-1/98,1998 [3] 方玉明,茅盘松.内框驱动式硅微型角振动陀螺仪灵敏度研究[J].电子器件,2004, 27(1):189-191 Fang Yueming, Mao Pansong. The sensitivity study of an angular vibratory micromechanical gyroscope driven by the inner frame[J]. Chinese Journal of Electron Devices, 2004, 27(1):189-191(in Chinese) [4] Greiff P,Boxenhom B, King T, et al. Silicon monolithic micromechanical gyroscope[J].IEEE,1991:966-968 [5] 吴学忠,刘宗林,李圣怡.微硅陀螺性能影响因素及其对策研究[J]. 微纳电子技术,2003,7(8):274-280 Wu Xuezhong,Liu Zonglin,Li Shengyi. Influence factors and enhancement on property of micro silicon gyroscopes[J]. Micron Electronic Technology,2003,7(8):274-280(in Chinese) [6] Liu Qin,Liu Li,Qi Zaikang. Error analysis and compensation of strapdown inertial navigation system[J].Journal of Beijing Institute of Technology,2002,11(2):117-120 [7] Yang Jing, Chang Wook, Bang Won-chul,et al. Analysis and compensation of error in the input device based on inertial sensors The International Conference on Information Technology:Coding and Computing.Michigan:IEEE,2004 [8] 谷宏强,马立元,郭利.速率捷联惯性测量系统的数学模型及误差标定[J]. 军械工程学院学报,1997,9(4):28-32 Gu Hongqiang,Ma Liyuan,Guo Li. Mathematical model and error demarcation of the rate strap-down inertial measuring system[J].Journal of Ordnance Engineering College, 1997,9(4):28-32(in Chinese) [9] 刘波,李学锋.速率捷联惯导系统陀螺仪误差分段补偿技术研究[J].航天控制,2005,23(1):72-75 Liu Bo, Li Xuefeng.The research of real time and segmented error compensation of gyroscope in SIMU[J].Aerospace Control, 2005,23(1):72-75(in Chinese) [10] 高新闻,陈孝威.捷联惯性测量系统的误差补偿研究[J].贵州大学学报,2003,20(2):173-179 Gao Xinwen,Chen Xiaowei. The error compensation investigation of inertial measurement system[J]. Journal of Guizhou University, 2003,20(2):173-179(in Chinese) [11] Don G Kim,Sung K Hong. The compensation of nonlinear thermal bias drift of resonant rate sensor(RRS) using fuzzy logic[J].IEEE,1998:38-42 [12] Harish K Joglekar,Venka A. Gyro scale-factor error and misalignment estimation for a spacecraft AIAA/AAS Astrodynamics Specialist Conference and Exhibit. Providence:AIAA,2004:1-8
|