Latitude distribution algorithm of cutter position optimization on drum-like cutter for strip-maximization

[1] Madhavulu G, Sundar S V N A, Ahmed B. CAD/CAM solutions for efficient machining of turbo machinery components by sturz milling method[J]. Industrial Electronics Control and Instrumentations, 1996, 3(8):1490-1495 [2] Rao N, Ismail F, Bedi S. Tool path planning for five-aixs machining using the principal axis method[J]. Int J Machine Tools Manufact, 1997, 37(7):1025-1040 [3] Gray P, Bedi S, Ismail F. Rolling ball method for 5-axis surface machining[J]. Computer-Aided Design, 2003, 35(4):347-357 [4] Max E, Jorg W, Thomas S. Method for processing work pieces by removing material:United States,US6, 485, 236 .2002-11-26 [5] 刘雄伟,张定华,杨海成,等. 数控加工理论与编程技术[M]. 北京:机械工业出版社,2000 Liu X W, Zhang D H, Yang H C, et al. NC machining theory and programming technologies[M]. Beijing:Mechanical Industry Press, 2000(in Chinese) [6] 李亢,郭连水. 透平机叶轮叶片五轴数控粗加工优化方法的研究[J]. 航空学报,2006,27(3):505-508 Li K, Guo L S. Research on method of 5-axis NC rough machining of turbine blade[J]. Acta Aeronautica et Astronautica Sinica, 2006, 27(3):505-508(in Chinese) [7] 吕雪丽. 广域曲率吻合原则与复杂曲面数控加工的全面优化 ．北京:北京航空航天大学机械工程及自动化学院,2003 Lü X L. Global curvature inosculate principle and comprehensive optimization of complex surface NC machining . Beijing:School of Mechanical Engineering and Automation,Beijing University of Aeronautics and Astronautics,2003(in Chinese) [8] 金曼,张俐,陈志同. 圆环面刀具五坐标加工端点误差控制刀位优化[J]. 北京航空航天大学学报,2006,32(9):1125-1128 Jin M, Zhang L,Chen Z T. End-points error controlling method for torus tool position optimization in five-axis NC machining[J]. Journal of Beijing University of Aeronautics and Astronautics, 2006,32(9):1125-1128(in Chinese) [9] 吕雪丽,张洪. 广域曲率吻合原则与复杂曲面数控加工的全面优化[J]. 机械设计与制造,2003,10(5):94-96 Lü X L, Zhang H. Principle of global curvature fitting and global optimization of sculptured surface NC machining[J]. Machinery Design and Machining,2003,10(5):94-96(in Chinese) [10] Warkentin A, Ismail F, Bedi S. Comparison between multi-point and other five-axis tool positioning strategies[J]. Machining Tool & Manufacture,2000,40(2):185-208