Citation: | Lu Zixing, Zhang Jialei, Wang Songet al. Investigation into elastic properties of anisotropic random foam model[J]. Journal of Beijing University of Aeronautics and Astronautics, 2006, 32(12): 1468-1471. (in Chinese) |
[1] 卢子兴, 石上路. 低密度开孔泡沫材料力学模型的理论研究进展[J]. 力学与实践, 2005,27(5):13-20 Lu Zixing, Shi Shanglu. Theoretical studies on mechanical models of low density foam[J]. Mechanics in Engineering, 2005,27(5):13-20(in Chinese) [2] Van der Burg M W D, Shulmeister V, Van der Geissen E, et al. On the linear elastic properties of regular and random open-cell foams models[J]. J Cell Plast, 1997,33:31-54 [3] Shulmeister V, Van der Burg M W D, Van der Giessen E, et al. A numerical study of large deformations of low-density elatomeric open-cell foams[J]. Mech Mater, 1998,30(2):125-140 [4] Roberts A P, Garboczi. Elastic properties of model random three-dimensional open-cell solid[J]. J Mech Phys Solids, 2002,50(1):33-55 [5] Roberts A P, Garboczi. Elastic moduli of model random three-dimensional closed-cell cellular solid[J]. Acta Mater, 2001,49(2):189-197 [6] Zhu H X, Hobdell J R, Windle A H. Effect of cell irregularity on the elastic properties of open-cell foams[J]. Acta Mater, 2000,48(20):4893-4900 [7] Zhu H X, Windle A H. Effects of cell irregularity on the high strain compression of open-cell foams[J]. Acta Mater, 2002,50(5):1041-1052 [8] Huang J S, Gibson L J. Creep of open-cell Voronoi foam[J]. Mater Sci Eng A,2003,339(1-2):220-226 [9] 袁应龙, 卢子兴. 利用随机模型计算低密度开孔泡沫材料的弹性模量[J]. 航空学报, 2004, 25(2):130-132 Yuan Yinglong, Lu Zixing .Calculation of the elastic modulus of low density open-cell foams with random model[J]. Acta Aeronautica et Astronautica Sinica,2004,25(2):130-132(in Chinese) [10] 王嵩, 卢子兴. 闭孔Voronoi泡沫的弹性性能分析[J].航空学报,2007,28(2) Wang Song, Lu Zixing. Investigation into the elastic properties of closed-cell Voronoi foam[J]. Acta Aeronautica et Astronautica Sinica,2007,28(2)(in Chinese) [11] 卢子兴, 王仁, 黄筑平,等. 泡沫塑料力学性能研究综述[J].力学进展,1996, 26(3):306-323 Lu Zixing, Wang Ren, Huang Zhuping, et al .A review of studies on the mechanical properties of foam plastics[J]. Advances in Mechanics, 1996,26(3):306-323(in Chinese) [12] Huber A T, Gibson L J. Anisotropy of foams[J]. J Mater Sci, 1988,23:3031-3040 [13] 谢兰生, 陈明和,童国权,等. 开孔泡沫铝弹性性能的各向异性研究[J]. 机械工程材料,2003, 27(2):7-9 Xie Lansheng, Chen Minghe, Tong Guoquan, et al. Anisotropic elastic properties of foam metal with open cells[J]. Mater Mech Eng, 2003, 27(2):7-9(in Chinese)
|
[1] | WEI J R,WU Q,WU W,et al. Study on global stability of aluminum alloy honeycomb cylinder under axial compression[J]. Journal of Beijing University of Aeronautics and Astronautics,2025,51(3):962-972 (in Chinese). doi: 10.13700/j.bh.1001-5965.2023.0135. |
[2] | ZHANG Yuhui, LIAO Shujiao, ZHAO Yuanyuan. Analysis of Healthy Load-bearing Mechanical Properties of Airport Taxiway Bridges under Multifactorial Effects[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2024.0299 |
[3] | DENG J X,CHEN L,LU S T,et al. Damage distribution of composite structures of a certain type aircraft[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(3):920-930 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0379. |
[4] | BAI Jianfeng, MENG Junhui, ZHANG Lili, WEI Shechun, MA Nuo. Dynamic performances research of the wing deployment considering fluid structure interaction[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2024.0645 |
[5] | PANG C,LIU D J,TIAN G,et al. Experimental and simulation study on fatigue multi crack fusion of 2195-T8 Al-Li alloy[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(1):350-358 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0249. |
[6] | LI Keyu, YANG Chao, WANG Xiaozhe, WAN Zhiqiang, LI Chang. Aeroelastic optimization of wing structure and material using multiple microstructures[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2024.0178 |
[7] | YANG Gong-peng, ZHOU Zheng-gan, MA Teng-fei, WANG Jun, LI Yang, ZHOU Wen-bin. Research on finite element simulation modeling for ultrasonic testing of coarse-grained materials[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2023.0676 |
[8] | CHEN Shi, XU He-ming, SUN Kai, XU Yi-han, ZHANG Yi-shang. Prediction of creep strain of turbine blades based on finite element nodes[J]. Journal of Beijing University of Aeronautics and Astronautics. doi: 10.13700/j.bh.1001-5965.2023.0639 |
[9] | RAN G L,MA Y H,AN Z Q,et al. Study of tensile properties of laminates containing microvascular channels with different diameters[J]. Journal of Beijing University of Aeronautics and Astronautics,2024,50(4):1405-1415 (in Chinese). doi: 10.13700/j.bh.1001-5965.2022.0490. |
[10] | DONG Q,CHENG S F,ZHANG X M,et al. Vibration response of asphalt concrete pavement under vehicle-road coupled load[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(9):2385-2394 (in Chinese). doi: 10.13700/j.bh.1001-5965.2021.0654. |
[11] | ZHU P R,LIU Y Z,LIU Z C,et al. Fault diagnosis of synchronous generator rotating rectifier based on CEEMD and improved ELM[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(5):1166-1175 (in Chinese). doi: 10.13700/j.bh.1001-5965.2021.0376. |
[12] | XU Q Y,MENG Y,LI S. Strain-based geometrically nonlinear beam modeling and analysis[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(8):2039-2049 (in Chinese). doi: 10.13700/j.bh.1001-5965.2021.0627. |
[13] | WU Y,KONG L,SUN Q Q,et al. Heat transfer path design and heat flow analysis of satellite phased array antenna[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(5):1127-1134 (in Chinese). doi: 10.13700/j.bh.1001-5965.2021.0373. |
[14] | HAN X,WANG Y X,CHENG X C,et al. A decentralized multi-sensor fusion estimator using finite memory buffers[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(2):335-343 (in Chinese). doi: 10.13700/j.bh.1001-5965.2021.0240. |
[15] | CHEN Y,ZHOU Z J,WANG J,et al. Structural safety assessment model of large liquid tanks considering environmental disturbance[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(4):981-989 (in Chinese). doi: 10.13700/j.bh.1001-5965.2021.0350. |
[16] | YANG H,XIE Z H,YANG H B,et al. Influence of penetration damage on in-plane compression properties of titanium honeycomb sandwich cover structure[J]. Journal of Beijing University of Aeronautics and Astronautics,2023,49(2):378-387 (in Chinese). doi: 10.13700/j.bh.1001-5965.2021.0249. |
[17] | HONG Zheng, YE Zhengyin. Numerical investigation on evolution of T-S wave on a two-dimensional compliant wall with finite length[J]. Journal of Beijing University of Aeronautics and Astronautics, 2022, 48(7): 1190-1199. doi: 10.13700/j.bh.1001-5965.2021.0030 |
[18] | LIU Mingjie, WU Qingshan, YAN Hao, YU Cunming, LIN Cunguo, ZHANG Jinwei, ZHAO Tianyi. Progress and challenges of bionic drag reduction surfaces[J]. Journal of Beijing University of Aeronautics and Astronautics, 2022, 48(9): 1782-1790. doi: 10.13700/j.bh.1001-5965.2022.0295 |
[19] | GONG Xiaoquan, WU Xiaojun, TANG Jing, LI Ming, ZHANG Jian. Application of r-grid adaptive for shock capturing in discontinuous Galerkin finite element method[J]. Journal of Beijing University of Aeronautics and Astronautics, 2022, 48(10): 1889-1898. doi: 10.13700/j.bh.1001-5965.2021.0046 |
[20] | WANG Rong, YU Yalin, WANG Lechen, MO Shenzhong, HUANG Yuqing, ZHOU Xiang. Effects of prepreg ambient-temperature storage life on mechanical properties of MT700/603 composites[J]. Journal of Beijing University of Aeronautics and Astronautics, 2022, 48(12): 2434-2441. doi: 10.13700/j.bh.1001-5965.2021.0121 |