Heat transfer measurements on a rotating disk with discrete receiver holes

[1] Wilson M, Pilbrow R, Owen J M． Flow and heat transferin a preswirl rotor-stator system[J]．Journal of Turbomachinery, 1997, 119:364-373 [2] Pilbrow R, Karabay H, Wilson M, et al. Heat transfer in a "cover-plate" preswirl rotating-disk system[J]．Journal of Turbomachinery, 1999, 121:249-256 [3] Karabay H, Wilson M, Owen J M ． Approximate solutions for flow and heat transfer in pre-swirl rotating-disc systems . ASME2001-GT-0200, 2001 [4] 徐国强,曹玉璋,邱绪光．中心进气的旋转盘平均换热特性研究[J]．航空动力学报,1994,9(1):27-30 Xu Guoqiang, Cao Yuzhang, Qiu Xuguang. An investigation on average heat transfer performance for rotating disk with central air inflow[J]．Journal of Aerospace Power,1994,9(1):27-30(in Chinese) [5] 徐国强．转静系下旋转盘腔内冷气的流动与换热特性研究 .北京:北京航空航天大学能源与动力工程学院,1999 Xu Guoqiang. An investigation of flow and heat transfer performance for rotating disk .Beijing:School of Jet Propulsion, Beijing University of Aeronautics and Astronautics, 1999(in Chinese) [6] 吉洪湖,Cheah S C,Iacovides H,等. 旋转盘腔流场速度与压力的实验研究[J]．工程热物理学报,1997,18(3):300-305 Ji Honghu, Cheah S C, Iacovides H, et al. An experimental investigation of velocity and pressure distribution inside a rotating disc cavity[J]．Journal of Engineering Thermophysics, 1997,18(3):300-305(in Chinese) [7] 罗翔．复杂旋转盘腔内冷气的流动与换热特性研究 ．北京:北京航空航天大学能源与工程学院,2003 Luo Xiang. Flow and heat transfer between a stator and a rotor with blade cooling holes ．Beijing:School of Jet Propulsion, Beijing University of Aeronautics and Astronautics, 2003(in Chinese)